ARRI L0.0007067 SkyPanel S60-C LED Softlight (Black, Bare Ends)
Product Highlights:
- Panel Surface Area: 25.4 x 11.8"
- 115° Beam Spread, Rail Mount Adapter
- Color Temperature from 2800-10,000K
- Full Gamut Color Mixing
- Hue and Saturation Control
- Full Minus to Full Plusgreen
- CRI: 95, TLCI: 90
- 0-100% Dimming, DMX Control
- Multi-Voltage AC, Optional Battery Power
- ARRI SkyPanel S60-C LED Softlight (Black, Bare Ends)
- Power Supply
- PSU Rail Mount Adapter for SkyPanel S30 and S60
- Standard Diffuser
- Limited 1-Year Warranty
ARRI L0.0007067 SkyPanel S60-C LED Softlight (Black, Bare Ends)
ARRI L0.0007067 SkyPanel S60-C LED Softlight (Black, Bare Ends)
ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the SkyPanel S60-C LED Softlight. Supported by a steel yoke, the panel surface area measures 25.4 x 11.8" and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. The SkyPort outputs the equivalent of a 2,000W tungsten soft light while drawing a maximum of only 450W.
Using technology originally designed for the L7-C Fresnel, the SkyPanel S60-C is fully color "tuneable" allowing output of a warm 2,800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full Minusgreen to Full Plusgreen is also possible, so if you're lighting for blue or greenscreen, you can simply dial your color chosen in. This wide degree of control is responsible for a very high CRI of 95 and a rating of 90 with the newer TLCI standard. All of these functions as well as 0-100% dimming can be adjusted locally with the SkyPanel's onboard controller or remotely via DMX or a LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive, PC or Mac.
The SkyPanel S60-C can be used worldwide, thanks to its included 90-250 VAC power supply but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1-1/8") pin and a standard diffuser. This version of the light has a pole operated yoke and comes with a bare ends power cord.
| Light Fixture |
|---|
| Beam Angle |
115° |
| Color Temperature |
2800 to 10,000K ± 100K (with 200K Shift over Lifetime) |
| Color Accuracy Standard |
CRI 95 |
| Cooling System |
None |
| Dimming |
Yes, 0 to 100% (Continuous) |
| Display |
None |
| Expected Lamp Life |
50,000 Hours |
| Rectangular Panel Size |
25.4 x 11.8" / 64.5 x 30 cm |
| Fixture Dimensions |
27.0 x 17.0 x 5.2" / 688.0 x 433.0 x 133.0 mm |
| Fixture Weight |
28.7 lb / 13 kg |
| Connectors |
|---|
| Power Input Connector |
3-Pin XLR |
| DMX Connector |
5-Pin XLR, EtherCON |
| Service Connector |
USB Type-A |
| Mounting |
|---|
| Yoke Mount |
TVMP/ Hex Bolt |
| Fixture Mount |
1-1/8" Stud |
| Accessory Mount |
None |
| Yoke |
|---|
| Yoke Material |
Steel |
| Yoke Type |
Pole Operated |
| Remote Operation |
|---|
| Remote Control Type |
DMX |
| Power |
|---|
| AC Input Power |
90 to 250 VAC, 50 / 60 Hz |
| DC Input Power |
48 VDC |
| Power Source |
AC Adapter, External Battery |
| Cable |
|---|
| Cable Type |
powerCON to Bare Ends |
| Power Supply |
|---|
| Power Supply Power Connector |
powerCON Input |
| Power Supply Weight |
11 lb / 5.0 kg |
| Physical |
|---|
| IP Rating |
IP20 |
| Operating Temperature |
-4 to 113°F / -20 to 45°C |
