ARRI L0.0007068 SkyPanel S60-RP Tungsten LED Remote Phosphor Softlight (Blue/Silver, Edison)
Product Highlights:
- Manual Yoke
- Panel Surface Area: 25.4 x 11.8"
- 110 Degree Beam Spread
- 0-100% Dimming, DMX Control
- CRI: 94
- Separate Multi-Voltage AC Power Supply
- Optional Battery Power
- Firmware Updates via USB
- Up to 50,000 Hour Lamp Life
- ARRI SkyPanel S60-RP Tungsten LED Remote Phosphor Softlight (Blue/Silver, Edison)
- Power Supply
- Remote Phosphor (3200K)
- Limited 1-Year Warranty
ARRI L0.0007068 SkyPanel S60-RP Tungsten LED Remote Phosphor Softlight (Blue/Silver, Edison)
ARRI L0.0007068 SkyPanel S60-RP Tungsten LED Remote Phosphor Softlight (Blue/Silver, Edison)
ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the SkyPanel S60-RP Tungsten LED Remote Phosphor Softlight. Supported by a steel yoke, the light's surface area measures 25.4 x 11.8" and employs interchangeable phosphor panels to achieve a specific Kelvin temperature instead of adding phosphors to blue LEDs. The powerful native LEDs then excite the phosphor panel that's mounted like a filter in front of the fixture. This method not only uses less electronics resulting in a lower price point, but delivers a color rendition that approaches current definitions of "perfection" and is 10% brighter than its color tuneable SC60-C counterpart which has an output equivalent to a 2,000W tungsten softlight. Both versions of the light draw only 450W.
This rendition of the light ships with a 3200K panel with an impressively high CRI of 94 but optional 2700K, 4300K, 5600K and 6500K phosphor panels with CRIs of 93, 97, 98 and 98 respectively are available, as well as a Chroma Green panel. Dimming from 0-100% dimming can adjusted locally with the SkyPanel's onboard controller or remotely via DMX or over an LAN network. Besides inputs and outputs appropriate to these functions, the light has a USB type-A port for downloading firmware upgrades from a thumb drive, PC, or Mac.
The SkyPanel S60-RP can be used worldwide, thanks to its included 90-250 VAC power supply but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1-1/8") pin. This blue/silver version of the light has a Manual mount and comes with an Edison power cord.
| Light Fixture |
|---|
| Beam Angle |
110° |
| Color Temperature |
3200K |
| Color Accuracy Standard |
CRI 98 at 2700K
CRI 98 at 3200K
CRI 97 at 4300K
CRI 97 at 5600K
CRI 96 at 6500K
CRI 92 at 10,000K
TLCI 98 at 2700K
TLCI 98 at 3200K
TLCI 96 at 4300K
TLCI 96 at 5600K
TLCI 94 at 6500K
TLCI 88 at 10,000K |
| Cooling System |
None |
| Dimming |
Yes, 0 to 100% (Continuous) |
| Display |
None |
| Expected Lamp Life |
50,000 Hours |
| Rectangular Panel Size |
25.4 x 11.8" / 64.5 x 30 cm |
| Fixture Dimensions |
27.0 x 17.0 x 5.2" / 688.0 x 433.0 x 133.0 mm |
| Fixture Weight |
26.5 lb / 12 kg |
| Connectors |
|---|
| Power Input Connector |
3-Pin XLR |
| DMX Connector |
5-Pin XLR, EtherCON |
| Service Connector |
USB Type-A |
| Mounting |
|---|
| Yoke Mount |
TVMP/ Hex Bolt |
| Fixture Mount |
1-1/8" Stud |
| Accessory Mount |
None |
| Yoke |
|---|
| Yoke Material |
Steel |
| Remote Operation |
|---|
| Remote Control Type |
DMX |
| Power |
|---|
| AC Input Power |
90 to 250 VAC, 50 / 60 Hz |
| DC Input Power |
48 VDC |
| Power Source |
AC Adapter, External Battery |
| Cable |
|---|
| Cable Type |
powerCON to NEMA 5-15 |
| Power Supply |
|---|
| Power Supply Power Connector |
powerCON Input |
| Power Supply Weight |
11 lb / 5.0 kg |
| Physical |
|---|
| IP Rating |
IP20 |
| Operating Temperature |
-4 to 113°F / -20 to 45°C |
