Clear-Com Active Transceiver Antenna
Product Highlights:
- Up to 10 Active Antennas can be connected to one system
- Up to 1,475 ft of coverage area per antenna
- 1.9GHz and 2.4GHz antennas can co-operate on the same system
- IP65 rated for water and dust resistance
- Microphone stand mounting
Clear-Com Active Transceiver Antenna
Clear-Com FSII-TCVR-19-US FreeSpeak II 1.9GHz
The Band Active Transceiver Antenna allows users to freely roam around a facility while staying connected to the base station. Each Active Antenna can create a coverage zone of up to 1,475 feet. One Active Antenna supports up to 5 beltpacks with the ability of adding more if roaming or more beltpack support is required. Up to 10 remote Active Antennas can be strategically placed to cover a wide area. Each active transceiver antenna is IP65 rated for water and dust resistance and has a mount for microphone stands, allowing use and placement in virtually any environment. Unique to the FreeSpeak II system, both 1.9GHz and 2.4GHz beltpacks and active transceiver antennas can co-operate on the same system, increasing both the quantity of users as well as the cell roaming area.
| ACTIVE ANTENNA |
| Beltpacks Supported Per Active Antenna: |
5 |
| Active Antenna Transmission Range: |
Up to 1475ft (450m) to beltpack in good conditions, 800 feet typical |
| Maximum Distance, Base to Antenna via Transceiver Port: |
3,200 ft (1,000 m) on 4-pair CAT-5 or better cable |
| Maximum Distance, Antenna Powered by FSII-BASE (Base): |
975 ft (300 m) on CAT-5 or better cable |
| Local Powering: |
24VDC power supply |
| Connection to FreeSpeak II Base: |
RJ-45 |
| Mounting: |
Integral screw mounts or standard microphone mounting (imperial and metric) |
| Dimensions: |
6.9 x 5.4 x 2.1in (175 x 135 x 50mm) (HxWxD) |
| Weight: |
11.9 oz (0.45 kg) |
| TRANSMISSION METHOD |
| Method of RF Operation: |
Uses two slots per beltpack for wider frequency response |
| Modulation: |
GFSK |
| Frequencies of Operation: |
from 1.8-1.93GHz** (restricted by software) |
| RF Output: |
250mW burst, average as new FCC level 2 - 4mW |
| **Exact frequency range depends upon country, and is preset e.g. Transceiver for Japan: 1.893GHz-1.906GHz. |
