Clear-Com RS-702 Encore Two-channel Standard Dual Listen Monaural Belt pack
Clear-Com RS-702 Encore Two-channel Standard Dual Listen Monaural Belt pack
Clear-Com RS-702 Encore Two-channel Standard Dual Listen Monaural Belt pack
The RS-702 is a 2-channel wired beltpack with an XLR-6 line connector and XLR-4M headset connector that combines high headroom with low-noise audio in a rugged, ergonomic housing. A thumbwheel level adjustment is available for Program In. The RS-702's wide dynamic range and audio contouring enable the "Clear-Com Sound" from quiet to noisy environments.
The RS-702 is compatible with all Encore partyline products, as well as the PL-Pro line and other partyline systems via Encore interfaces.
Live broadcasting is about delivering the highest quality programming, instantly and on cue. As viewers' expectations of broadcasting change, your production communication becomes increasingly more critical - there is no second take.
Managing a busy broadcast schedule requires coordination between the newsroom, production control room, electronic news gathering area, master control and studio, and mobile units, making reliable communications a must. Clear-Com has the industry experience, knowledge, and intercom systems to help you make this possible.
| Microphone Pre-Amplifier |
|---|
| Mic to Line (without limiter acting) Frequency Response |
280 - 15k Hz ± 3dB |
| Microphone output to line - Audio Level (-50dBm Electret input) |
-9dBm |
| Microphone output to line - Distortion |
<0.1% |
| Microphone output to line - Signal to Noise |
>65dB |
| Clear-Com Sound |
Yes |
| Headphone Amplifier |
|---|
| Frequency Response - Line to Headphone |
150 - 20k Hz ± 3dB |
| Headphone input from line - Audio Level (-9dBm Electret input) |
7dBm |
| Headphone input from line - Distortion |
<0.5% |
| Headphone input from line - Signal to Noise |
>50dB |
| Earphone to Mic - Crosstalk |
>80dB |
| Sidetone - Adjustment Range (-80db mic input) |
>45dB |
| Keypad Indicators |
|---|
| Power |
Green LED |
| Talk A |
Green LED |
| Call A |
Orange LED |
| Talk B |
Green LED |
| Call B |
Orange LED |
| Connectors |
|---|
| Intercom Line |
(2) 6-pin XLR-M-F Ch. 1 2-Wire |
| Intercom Channel Pin 1 |
Common; Pin 2: PL Power (+28VDC); Pin 3: PL Ch-B; Pin 4: PL Ch-A;
Pin 5: Program Audio; Pin 6: Program Audio |
| Headset |
4-pin XLR-M |
| Headset Connector Pin 1 |
Mic - (Mic Common); Pin 2: Mic +; Pin 3: Spkr-; Pin 4: Spkr+
(&0.5*VCCDC Supply between Pin 4 & Pin 1) |
| Program Audio Input |
XLR-6, pins 5 & 6 |
| Power Requirements |
|---|
| Voltage input range |
12 MIN - 30 MAX VDC |
| Current (all inputs off) |
~13mA MAX |
| Call Voltages - Call Voltage |
16.5V dc |
| Call Voltages - Min Call Voltage needed |
3.3V |
| Environmental |
|---|
| Operating Temp |
Range: 0°C - 70°C (32°F - 158°F) |
| Storage Temp Range |
0°C - 70°C (32°F - 158°F) |
| Relative Humidity |
0 - 90% non condensing |
| Dimensions |
3.4in H x 4.5in W x 1.7in D
(86.4 x 114.3 x 43.2 mm) |
| Weight |
0.68 lbs (0.31 kg) |
