Crystal Video BEAMLINK-QUAD 4-Channel Full HD Wireless Video Transmission System
Product Highlights:
- Four Simultaneous 3G-SDI/HDMI Signals
- Supports up to 1080p60
- 1640' Line-of-Sight Range
- Tally Input/Output
- Crystal Video Technology BeamLink-Quad 4-Channel Full HD Wireless Video Transmission System
- 4 x Transmitter
- Receiver
- 16 x Transmitter Antenna
- 4 x Receiver Antenna
- 4 x 1/4"-20 Screw and Nut Connector
- 4 x Power Cable for Transmitter
- Power Adapter for Receiver
- Metal Stand for Receiver
- Limited 18-Month Warranty
Crystal Video BEAMLINK-QUAD 4-Channel Full HD Wireless Video Transmission System
Crystal Video BEAMLINK-QUAD 4-Channel Full HD Wireless Video Transmission System
The BeamLink-Quad 4-Channel Full HD Wireless Video Transmission System from Crystal Video Technology includes four transmitters and one receiver. This system allows you to send four 3G-SDI and HDMI signals to the receiver simultaneously over a range up to 2600'. The receiver features four SDI and four HDMI outputs. Signals up to 1080p60 can be transmitted with a latency of 70 ms over one RF channel on the 5.1 to 5.8 GHz frequency. The system also offers tally input and output, and all five units confirm transmission status via OLED displays.
The transmitters are designed with a Sony-type battery dock on the rear and include a preinstalled V-mount on the front, while the receiver comes with an attached V-mount plate. The entire set can also be powered continuously. A power adapter is included for the receiver, and four cables are supplied for powering the transmitters off compatible batteries.
| Transmitter |
|---|
| Connections |
1 x 3G-SDI Input
1 x HDMI Input
1 x Tally Output
1 x RS-232 Output
1 x Power |
| Resolution Supported |
Up to 1080p60 |
| Transmission Range |
2600' / 800 m Line of Sight
Video Code Rate: 8 Mb/s per Channel |
| Antenna |
4x4 MIMO and Beamforming |
| Transmission Power |
17 dBm |
| Frequency |
5.1 to 5.8 GHz |
| Latency |
70 ms |
| Operating Voltage |
7 to 17 V |
| Audio Formats |
MPEG-2, PCM |
| Power Consumption |
10 W |
| Operating Temperature |
14 to 122°F / -10 to 50°C |
| Storage Temperature |
-4 to 176°F / -20 to 80°C |
| Dimensions |
3.8 x 1.8 x 5.0" / 9.6 x 4.6 x 12.7 cm |
| Receiver |
|---|
| Connections |
4 x 3G-SDI Outputs
4 x HDMI Outputs
1 x Tally Input
1 x RJ45 Output
1 x RS-232 Input
1 x Power |
| Resolution Supported |
1080p60 |
| Antenna |
4x4 MIMO and Beamforming |
| Receiving Sensitivity |
-70 dBm |
| Frequency |
5.1 to 5.8 GHz |
| Bandwidth |
40 MHz |
| Transmission Range |
2600' / 800 m Line of Sight
Video Code Rate: 8 Mb/s per Channel |
| Audio Formats |
MPEG-2, PCM |
| Operating Voltage |
7 to 17 V |
| Power Consumption |
20 W |
| Operating Temperature |
14 to 122°F / -10 to 50°C |
| Storage Temperature |
-4 to 176°F / -20 to 80°C |
| Dimensions |
6.9 x 3.2 x 9.3" / 17.6 x 8.1 x 23.5 cm |
