Hollyland Solidcom M1 - Full-Duplex Wireless Intercom System with 8 Belt Packs, All-Round Upgrade Pro Gear in Simpler Form

Hollyland Solidcom M1 - Full-Duplex Wireless Intercom Solution

With major technical breakthrough, Hollyland is proud to present you a whole new series of full-duplex wireless intercom - Solidcom. As the first member of this series, Solidcom M1 is your go-to choice for micro-mid events with a capacity from 100 to 1000 guests, including church events, electronic field productions, exhibitions, concerts, etc.

Enhanced Audio Quality

Adopting self-developed Noise-Cancellation Algorithms and a super-wide frequency response, Solidcom M1 delivers authentic and premium sound at broadcast-level sampling rate.

Enhanced Operating Experience

An integrated panel antenna is embedded in the base station for effortless setup. Featuring minimalist button design, the beltpack provides you intuitive operating experience. In addition, settings and grouping of the whole set can be adjusted easily via base station, APP or web.

Enhanced Capacity

Each standard Solidcom M1 package comes standard with 8 beltpacks and supports cascade connection of multiple devices as well as maximum 3 communication groups.

Hollyland Solidcom M1 - Full-Duplex Wireless Intercom Solution

Product Highlights:

• Industry-First Solution To Power Up to 1000ft-Radius Communication Range
• Enhanced Audio Quality. Let Your Voice be Heard Crisp and Loud
• Intuitive Grouping at A Single Tap
• Multi-Device Cascade Connection for Hassle-Free Group Communication
• Born Rugged, Take It Anywhere with You
• Out-of-the-Box Convenience
• Ergonomic Button Layout for Smooth & Precise Operation
• A Plethora of Choices for Your Ears
• Say No to Low-Battery Anxiety

• Station x 1
• Beltpack x 8
• Charging Base x 1
• High Gain Omnidirectional Antenna x 2
• LEMO Single-Ear Headset x 8
• RJ45 to XLR Cable (5 meters) x 1
• USB-Type-A to Type-C Cable x 1
• POE Adapter x 1
• 4-Pin XLR Adapter x 1
• Beltpack Battery x 16
• 3/8 Installation Accessory x 1
• User Guide x 1

Hollyland Solidcom M1 Full-Duplex Wireless Intercom Solution

Hollyland Solidcom M1 - Full-Duplex Wireless Intercom Solution

With major technical breakthrough, Hollyland is proud to present you a whole new series of full-duplex wireless intercom - Solidcom. As the first member of this series, Solidcom M1 is your go-to choice for micro-mid events with a capacity from 100 to 1000 guests, including church events, electronic field productions, exhibitions, concerts, etc.

Enhanced Audio Quality

Adopting self-developed Noise-Cancellation Algorithms and a super-wide frequency response, Solidcom M1 delivers authentic and premium sound at broadcast-level sampling rate.

Enhanced Operating Experience

An integrated panel antenna is embedded in the base station for effortless setup. Featuring minimalist button design, the beltpack provides you intuitive operating experience. In addition, settings and grouping of the whole set can be adjusted easily via base station, APP or web.

Enhanced Capacity

Each standard Solidcom M1 package comes standard with 8 beltpacks and supports cascade connection of multiple devices as well as maximum 3 communication groups.

Hollyland Solidcom M1 Specs
General Info
Number of Included Headsets	8 x Single-Sided Headset
Number of Included Transceivers	1 x Base Station 8 x Beltpack
Number of Included Charging Base	1 x Charging Base
Frequency Response	200Hz to 7KHz
Signal-to-Noise Ratio	>50dB
Distortion	<1%
Headphone
Earpiece Design	Over-Ear (Circumaural)
Sound Field	Mono
Wireless Connectivity
RF Bandwidth	1.728 MHz
Wireless Modulation	GFSK
Duplex Mode	Full-Duplex (FDX)
Transmit Power	Maximum 21dBm
Approximate RF Sensitivity	-93 dBm
Wireless Range	1476' / 450 m
Base Station
I/O Connectors	1 x Power Supply Interface (RJ45) 1 x POE Interface (RJ45) 1 x 4 Wire Audio Interface (RJ45) 1 x USB Interface 1 x 2 Wire Audio Interface (XLR)
Dimension	(L*W*H): 255.5*180.4*48.5mm
Weight	About 1560g
Antenna	2 x External Omnidirectional Fiberglass Antenna 1 x Internal Panel Antenna
AC/DC Power Supply	2 x NP-F Battery (6.5 to 16V DC) 1 x POE Power Adapter (44 to 57V DC)
Power Consumption	3 W
Beltpacks
Maximum Users per System	8
I/O Connectors	1 x 3.5mm Headset Interface 1 x LEMO Headset Interface 1 x USB-Type-C Interface
Dimension	(L*W*H): 105*65*22.4mm
Weight	About 200g
Antenna	2 x External
Power Supply	1 x rechargeable Li-ion Battery
Capacity (mAh)	1500 mAh
Runtime	6 Hours
Power Consumption	0.6 W
Charging Base
AC /DC Power Interface	1 x 4pin XLR Power Interface
Dimension	(L*W*H): 273*184*41.5mm
Weight	About 900g
Environmental
Charging Temperature	32 to 113°F / 0 to 45°C
Operating Temperature	32 to 113°F / 0 to 45°C
Storing Temperature	-4 to 140°F / -20 to 60°C
Certifications	CE, FCC, RoHS, TELEC, NCC as per Manufacturer
Packaging Info
Package Weight	25.2 lb (Device) 16.9 lb (Headphone)
Box Dimensions (LxWxH)	21.6 x 18.3 x 9.3"