Lowell Manufacturing Mixer with Preamplifier, Rackmount Brackets
Product Highlights:
- Six channels
- Includes rackmount brackets
- Post-master volume control outputs
- Pre-master volume control tape output at dual parallel RCA jacks
- Frequency Response 20Hz–20kHz ±1dB
- Chassis is 19″W x 1.80″H x 9.875″D with black finish
- Includes rack mounting brackets
Lowell Manufacturing Mixer with Preamplifier, Rackmount Brackets
Lowell Manufacturing MIX2 Mixer with Preamplifier, Rackmount Brackets
Mixer/pre-amplifier features six channels, each with a microphone input at a removable Phoenix connector, and an AUX input at an RCA jack. The seventh channel (AUX only) has a front panel switch to select one of two AUX input jacks in the rear panel. Steel with black powder epoxy finish. Includes brackets to mount to 19-inch rack.
| MIX2 Specs |
|---|
| AC Supply Voltage |
115VAC/230VAC (switch under chassis), 50/60Hz, Power Consumption: 5W |
| Input Channels 1-6 |
Microphone Inputs – balanced Phoenix connectors: 1mV (to reach 0dB 775mV output),
600 ohms AUX Inputs – unbalanced
RCA connectors: 140mV (to reach 0dB 775mV output), 24k ohms |
| Input Channel 7 |
AUX Inputs – Switchable on front panel –
RCA jack "A" or RCA jack "B" 100mV (to reach 0dB 775mV output),
28k ohms |
| Outputs |
Main Output – Unbalanced parallel RCA jacks 775mV, 280 ohms
Line Output – Balanced 775mV, 600 ohms and
MIC Output – 7mV, 50 ohms both on removable Phoenix connector.
Tape Output – Unbalanced parallel RCA jacks 75mV, 280 ohms |
| Frequency Response |
20Hz–20kHz ±1dB |
| Signal to Noise Ratio |
MIC 60dB AUX 65dB (from 0dB output level), Total Harmonic Distortion: ≤.05% |
| Dimensions |
19" x 1.80" x 9.875" |
| Unit Weight |
7 lbs. |
| Shipping Weight |
12.35 lbs. |
