| SDI Outputs |
2 x SDI video on 75 Ω BNC connectors
Each output is the same format and frequency, but can have different patterns
SMPTE 424M, SMPTE 292M, SMPTE 259M |
| Video Formats |
SDTV 270 Mb/s: 525 (480i/59.94), 625 (576i/50)
HDTV 1.5 Gb/s: 1080i/60, 1080i/59.94, 1080i/50, 1080p/30, 1080p/29.97,
1080p/25, 1080p/24, 1080p/24.98, 1080psf/25, 1080psf/24,1080psf/23.98,
720p/60, 720p/59.94, 720p/50, 720p/30, 720p/29.97, 720p/25, 720p/24, 720p/23.98
HDTV 3 Gb/s: 1080p/60, 1080p/59.94, 1080p/50 |
| 3G Communication |
One 3G stream on both BNC connectors. Direct mapping Level A (SMPTE 425)
Two individual 1.5 Gb/s streams, one per BNC Connector. Dual Link (SMPTE 372)
Two individual 1.5 Gb/s streams multiplexed into a single 3 Gb/s stream
Dual Link Level B (SMPTE 425) |
| Audio |
4 x independent audio channels (2 Stereo pairs) each with adjustable level and frequency
Preset frequency selections: 50, 100, 200, 400, 600, 800, 1 k, 3 k, 6 k, 9 k,
12 k, 15 k, 18 k, and 20 kHz
Level adjustments: 0 to -79 dBFS in 1 dB steps
All 4 channels available to both SDI output embedders, which can embed 8 channels into
any two groups (selectable). Each SDI Embedder can be configured independently with
different groups and channel assignments. |
| Sync Output |
1 x Analog sync output, BNC connector 75 Ω
Reference output is the same standard as the selected SDI output
SDTV = Bi-level analog sync only (no burst or video content)
HDTV = Tri-level analog sync |
| Patterns |
Static Patterns: 100 Split Colorbars, 75 Split Colorbars, 100 Full Bars, 75 Full Bars,
SMPTE 219 Colorbars, Full Field Red, Full Field Green, Full Field Blue, Full Field Black,
Full field White, Pluge, Crosshatch, 5-Step Staircase, Valid Ramp, Limit Ramp, Multiburst,
Frequency Sweep, Pathological EQ/PLL
Dynamic Patterns: EBU A/V Sync Pattern, Moving Boxes
3D Patterns: 3D Boxes (left eye / right eye), 3D Gray Boxes (left eye/right eye) |
| Overlay |
Text Overlay: Single line, 16 characters max, static or scrolling horizontally
Circle: 1 pixel circle centered on test pattern
Markers: Safe Action or Safe Title markers per SMPTE RP218-2002 |
| Internal Power |
Internal rechargeable battery. Full charge provides approx 4 Hours continuous use |
| External Power |
External power / charge is provided via the USB port |
| Charging Time |
USB 2.0: 360 minutes approximately (from empty) with Testor | lite 3G switched off
USB-DCP Power Supply: 100 minutes approximately with unit switched off and
180 minutes approximately with unit switched on |
| Ambient Temperature |
41 to 104ºF (5 to 40ºC) |
| Humidity |
90% non condensing |
| Safety |
IEC 60950-1.2005/ EN 60950-1:2006 |
| Dimensions |
5.1 x 3.0 x 0.9" (13.0 x 7.7 x 2.3 cm) with connectors |
| Weight |
8.8 oz (250.0 g) |
