Marshall Electronics RCP-PLUS Multicamera Control Touchscreen
Product Highlights:
- 5" Touchscreen Camera Controller
- For Marshall & Other Popular Cameras
- 7 Cameras RS-485 or 100 VISCA-over-IP
- Adjust, Paint & Match Cameras Remotely
- Up to 1000' Maximum 3-Pin XLR Cable Run
- Apply Settings to Each or All Cameras
- White Balance, Exposure, Zoom, Focus
- Menu Displays on Controller, Not Feed
- Converts to Fiber for Longer Distances
- Power via PoE or Included DC Adapter
- Marshall Electronics RCP-PLUS Multicamera Control Touchscreen
- 12 VDC Power Adapter (120-240 VAC)
- Extender Wing Mount
- Mounting Screws
- 3-Pin XLR to Euroblock Adapter
- Limited 1-Year Manufacturer Warranty
Marshall Electronics RCP-PLUS Multicamera Control Touchscreen
Marshall Electronics RCP-PLUS Multicamera Control Touchscreen
Advanced Multi-Camera Control
The Marshall RCP-PLUS Multicamera Control Touchscreen provides a powerful and intuitive solution for managing multiple cameras from a single interface. Supporting both VISCA-over-IP and RS-485 protocols, it allows seamless control of different camera types without the need to switch modes.
Flexible Mix-and-Match Configuration
With support for up to 7 cameras via RS-485 and up to 100 cameras when combining RS-485 and VISCA-over-IP, the RCP-PLUS enables customized control setups. Users can assign different control types to adjacent buttons, streamlining operation across complex camera systems.
Wide Camera Compatibility
Pre-programmed with control protocols for all Marshall cameras—including POV, PTZ, varifocal, and zoom models—the RCP-PLUS also supports select third-party cameras. It utilizes VISCA-over-IP to control models such as the CV420e/Ne, CV355-30X, CV420-30X, CV370/374, and CV570/574 series.
Comprehensive Camera Adjustment
The controller allows precise adjustment of camera settings including white balance, exposure, pedestal levels, gain, gamma, iris, shutter, frame rate, and resolution. Users can apply changes individually or across multiple cameras, with a Favorites Menu for quick access to commonly used controls. Presets can be stored directly on the unit or via USB.
Intuitive Touchscreen and Dial Controls
Housed in a durable aluminum chassis, the RCP-PLUS features a large 5-inch TFT LCD touchscreen along with dual fine-tuning dials for fast and accurate adjustments during operation.
Long-Distance Remote Operation
The unit supports remote control over widely available 3-pin XLR cables at distances up to 1000 feet. It includes a 3-pin XLR to Euroblock adapter and can be adapted for fiber use in extended-range applications.
Flexible Power Options
The RCP-PLUS can be powered via PoE (Power-over-Ethernet) or with the included DC adapter, operating efficiently with an average power consumption of less than 12 watts.
| Marshall Electronics RCP-PLUS Specs |
|---|
| General |
|---|
| Compatibility |
Not Specified by Manufacturer
|
| Display |
|---|
| Panel Type |
TFT LCD
|
| Size |
5"
|
| Native Resolution |
480 x 854
|
| Touchscreen |
Yes
|
| Maximum Brightness |
400 nits / cd/m2
|
| Inputs/Outputs |
|---|
| USB I/O |
1 x USB-A 2.0 Female Input
|
| Media/Memory Card Slot |
Yes
|
| Internal Storage |
Yes
|
| Other Input/Output |
RS-485: 1 X 3-Pin XLR (Female) LAN: 1 x RJ45 (Female)
|
| Wireless |
|---|
| Wireless |
Yes
|
| Global Positioning (GPS, GLONASS, etc.) |
Yes
|
| Power |
|---|
| Power Source |
DC Input, PoE
|
| DC Input Power |
12 VDC
|
| Power Consumption |
2.5 W (Typical)
|
| Physical |
|---|
| Mounting |
3x Pass-Through Holes
|
| Color |
Black
|
| Material of Construction |
Machined Aluminum
|
| Operating Conditions |
-4 to 158°F / -20 to 70°C
|
| Storage Conditions |
-22 to 176°F / -30 to 80°C
|
| Dimensions |
8.6 x 4 x 1.9" / 21.8 x 10.2 x 4.8 cm
|
| Weight |
1.6 lb / 725 g
|
| Packaging Info |
|---|
| Package Weight |
2.97 lb
|
| Box Dimensions (LxWxH) |
10.7 x 5.3 x 4.9"
|
