Marshall Electronics VSW-2000 4x1 3G-SDI Switcher
Product Highlights:
- Four SDI Inputs
- Supports SD, HD, and 3G-SDI Signals
- Re-Clocked Output
- Front Panel Controls
- Includes IR Remote Control
- RS-232 Control Enabled
Marshall Electronics VSW-2000 4x1 3G-SDI Switcher
- IR Remote Control
- Power Supply
- Limited 1-Year Warranty
Marshall Electronics VSW-2000 4x1 3G-SDI Switcher
Marshall Electronics VSW-2000 4x1 3G-SDI Switcher
Simply switch between four SDI sources with the Marshall Electronics VSW-2000 4x1 3G-SDI Switcher. Four SDI inputs accept SD, HD, and 3G-SDI signals from cameras, recording decks, and other professional equipment and with the push of a button on the front panel, sends one selected signal to the SDI output. The VSW-2000 analyzes incoming signals in order to optimize transmission. The SDI output is re-clocked to ensure that long cable lengths can be used. For convenience, the included infrared remote control can perform input selection functions. Alternatively, the RS-232 interface can be used.
| SDI Standards |
SD, HD, 3G
Protocols: DVB-ASI at 270 Mbps, SMPTE-259M, SMPTE-292M, SMPTE-424M, SMPTE-425M |
| Video Bandwidth |
2.97 Gpbs, 2.97/1.001 Gbps |
| Re-Clocking |
Yes |
| Cable Equalization |
3G: Up to 300' / 90 m
HD: Up to 500' / 150 m
SD: Up to 1000' / 300 m |
| Inputs |
4 x BNC SDI |
| Outputs |
1 x BNC SDI |
| Eye Pattern Characteristics |
Amplitude: Within 800 MV (<10%)
Rise Overshoot: Less than 2% (<10%)
Fall Overshoot: Less than 2% (<10%)
Long Time Jitter: 0.195 UI (<1.0 UI)
Timing Jitter: 0.8 UI (<1.0 UI)
Alignment Jitter: 0.13 UI (<0.2 UI) |
| Power Supply |
5 VDC, 4 A |
| Power Consumption |
5 W (max) |
| Environmental |
Operating Temperature: 32 to 104°F / 0 to 40°C
Storage Temperature: -4 to 140°F/ -20 to 60°C
Humidity: 20 to 90% RH, non-condensing |
| Dimensions |
6.5 x 2.8 x 1.0" / 165 x 71 x 26 mm |
| Weight |
14.5 oz / 411 g |
