MuxLab HDMI over IP H.264/H.265 PoE Receiver
Product Highlights:
- Receiver supports up to 4K @ 60 Hz (4:4:4) video streams
- Receiver up-scales 1080p @ 60 Hz video streams from Transmitter and other devices up to 4K @ 60 Hz
- Transmitter supports up to 1080p @ 60 Hz video
- Extends local audio/video transmission up to 330 ft (100 m) over Cat5e/6
- H. 264/265 video codec, excellent for LAN, Wi-Fi & Internet transmission
- High image quality and 100 ms latency depending on protocol
- MuxLab 500762-RX HDMI over IP H.264/H.265 PoE Receiver
MuxLab HDMI over IP H.264/H.265 PoE Receiver
MuxLab 500762-RX HDMI over IP H.264/H.265 PoE Receiver The HDMI over IP H.264/H.265 PoE Extender Transmitter and Receiver combination allows HDMI source and display equipment to be extended locally up to 330 ft (100 m) at up to 4K @ 60Hz resolution via Cat5e/6 cable in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a low bandwidth, flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. The exceptionally low bandwidth requirements of this device combination allows for streaming audio/video content over a local network, over Wi-Fi, and over the Internet for distributed installations spread-out throughout the globe. The transmitter accepts a 1080p @ 60Hz video and streams the content to the Receiver, where the signal is up-scaled up to 4K @ 60 Hz to be displayed on a 4K monitor. The Receiver also accepts H.264/H.265 video streams from other transmitting devices of up to 4K @ 60 Hz, and supports a USB 3.0 Type A connector for storing and playback of local content from an external USB drive. These devices support PoE (PD) and may be powered by a PoE (PSE) Ethernet Switch.
Key Features
- Receiver supports up to 4K @ 60 Hz (4:4:4) video streams
- Receiver up-scales 1080p @ 60 Hz video streams from Transmitter and other devices up to 4K @ 60 Hz
- Transmitter supports up to 1080p @ 60 Hz video
- Extends local audio/video transmission up to 330 ft (100 m) over Cat5e/6
- H. 264/265 video codec, excellent for LAN, Wi-Fi & Internet transmission
- High image quality and 100 ms latency depending on protocol
- Supports 100's of Transmitters & Receivers depending on network bandwidth
- Supports Multicast (LAN), and RTSP/RTMP/HLS (LAN & Internet)
- USB 3.0 port for storing and playback of local content from an external USB drive (RX)
- Supports SPDIF (TosLink) Audio Out (RX)
- 2CH audio insert (TX), and 2CH audio extract (RX)
- RS232 and Directional IR for remote control of end-devices
- PoE powered, via PoE (PSE) Ethernet Switch
- Managed remotely via Pro Digital Network Controller (500811)
MuxLab H.264/H.265 PoE Receiver Specs |
General |
Device Type |
Video/audio/infrared/serial extender |
Form Factor |
External |
Networking |
Connectivity Technology |
Wired |
Data Link Protocol |
HDMI |
Max Resolution |
2160p @ 60 Hz |
Max Video Bandwidth |
225 MHz |
Max Transfer Distance |
328 ft |
Features |
4K resolution support |
Expansion / Connectivity |
Interfaces |
1 x HDMI (output) - 19 pin HDMI Type A 1 x IrDA - mini jack 1 x RS-232 - DB-9 1 x network - RJ-45 1 x audio (output) - mini jack |
Power |
Power Over Ethernet (PoE) |
PoE |
Power Device |
External power adapter |
Dimensions & Weight |
Width |
4.4 in |
Depth |
3.6 in |
Height |
1 in |
Weight |
14.11 oz |
Manufacturer Warranty |
Service & Support |
Limited warranty - 3 years |
Environmental Parameters |
Min Operating Temperature |
32 °F |
Max Operating Temperature |
104 °F |
Humidity Range Operating |
0 - 95% (non-condensing) |
Packaging Info |
Package Weight |
0.845 lb |
Box Dimensions (LxWxH) |
8.5 x 6.5 x 3" |