Nila Varsa Daylight LED Fixture
Product Highlights
- 1x VarsaTungsten Fixture
- 6x Holographic Film Lenses
- 4x Hard CTB Gels
- 1x Lens Pouch
- Replaces 400W HMI or 600W Tungsten Light
- 90-305 VAC/10-18 VDC Input
- Flicker-Free Output
Nila Varsa Daylight LED Fixture
Nila Varsa Deluxe Tungsten Kit
The Varsa Deluxe Tungsten Kit was put together by Nila for image makers who need lots of light with a minimum of fuss. Designed to replace 400W HMIs and 600W tungsten fixtures, the Varsa draws just 75 watts and is flicker-free at 100% power at any frame rate and up to 5000 fps for the rest of the dimming range which is controllable either locally or remotely via DMX. Focusing is done with the included 10, 20, 40, 60, 80 and 10° x 60° holographic lenses. The Varsa is ready for worldwide use thanks to its 90-305 VAC power supply or it can run on a 10-18 VDC battery when mains power is unavailable.
| Varsa Daylight LED Fixture |
|---|
| Color Range |
Daylight balanced |
| Photometrics |
Open Face
3.0' / 0.9 m: 9400 fc
10.0' / 3.0 m: 1200 fc
20.0' / 6.1 m: 300 fc (daylight-balanced fixture only) |
| Operating Voltage |
90 to 305 VAC, 50-60 Hz
10 to 18 VDC |
| Power Draw |
70 W (power factor corrected) |
| Dimming |
0-100% |
| Control |
Wireless or wired DMX |
| Lamp Life |
Approx. 60,000 hours |
| Cooling |
Passive |
| Connectors |
AC: Locking IEC with NEMA 5-15P connector (10' / 3.1 m)
DC: 4-pin XLR
DMX: 2 x RJ-45 |
| Compliances |
ETL, CE |
| Mount |
Included yoke with baby pin stud |
| Material |
Machined aluminum alloy housing with anodized finish |
| Dimensions |
Fixture: 7 x 6.5 x 7" / 178 x 165 x 178 mm
With yoke attached: 9 x 12 x 7" / 229 x 305 x 256 mm |
| Weight |
With Lens & Yoke: 10 lb / 4.5 kg |
| Varsa Barndoor Set |
|---|
| Packaging Info |
| Box Dimensions (LxWxH) |
9.7 x 9.5 x 2.4" |
| 40 Degree Narrow Spot Holographic Lens for Varsa LED Light |
|---|
| Beam Angle |
40° |
| Compatibility |
Varsa |
| Packaging Info |
| Box Dimensions (LxWxH) |
7.8 x 7.4 x 2.2" |
| 60 Degree Narrow Spot Holographic Lens for Varsa LED Light |
|---|
| Beam Angle |
60° |
| Compatibility |
Varsa |
| 80 Degree Narrow Spot Holographic Lens for Varsa LED Light |
|---|
| Beam Angle |
80° |
| Compatibility |
Varsa |
| 10 x 60 Degree Elliptical Holographic Lens for Varsa LED Light |
|---|
| Beam Angle |
10 x 60° |
| Compatibility |
Varsa |
| Varsa CTB Set |
|---|
| Compatibility |
Nila Varsa Light Fixture |
| Type |
Light balancing |
| Size |
7.0 x 7.0" (17.8 x 17.8 cm) |
| Effect |
Converts the output of a Nila Varsa light fixture installed with a
tungsten color temperature bulb to a daylight color temperature
|
| Transmission |
1/8 CTB: 81% (0.3 stop)
1/4 CTB: 74% (0.4 stop)
1/2 CTB: 52% (0.9 stop)
Full CTB: 36% (1.5 stop) |
| Mired Shift |
1/8 CTB: -12
1/4 CTB: -30
1/2 CTB: -68
Full CTB: -131 |
| Construction |
Polycarbonate |
| Varsa Lens Pouch for Six Lenses & Four Color Gels |
|---|
| Dimensions |
Not provided by manufacturer |
| Weight |
Not provided by manufacturer |
