| General |
| Power Requirements |
12 V DC (10.8 V to 13.2 V) |
| PoE+ |
IEEE802.3at standard: DC 42 V to 57 V (Camera Input) |
| Current Consumption |
1.0 A (Connector Input)
0.6 A (PoE+ power supply) |
| Ambient Operating Temperature |
: 0 °C to 40 °C (32 °F to 104 °F) |
| Allowable Humidity |
20% to 90% (no condensation) |
| Storage Temperature |
–20 °C to 50 °C (–4 °F to 122 °F) |
| Weight |
Approx. 3.2 kg (7.05 lb) |
| Dimensions (W x H x D) |
342 mm x 178 mm x 245 mm (13-15/32 inches x 7 inches x 9-21/32 inches)
(excluding protrusions) |
Connection
Supported
Equipment |
IP/RS422
AW-UE150W/K
AW-HR140
AW-HE130W/K
AW-HN130W/K
AW-UE70W/K
AW-UN70W/K
AW-HE40 Series
AW-HN40HW/HK
AW-HE38HW/HK
AW-HN38HW/HK |
| Input/Output Connectors |
| Input: DC 12 V IN |
XLR 4-pin |
| Input: 3G-SDI IN |
SMPTE292 / 75 Ω (BNC x 1)
Supported formats:
1080/59.94p*2, 1080/50p*2,
1080/59.94i, 1080/50i, 1080/23.98p,
1080/25p, 1080/23.98PsF, 1080/25PsF |
| Output: ACTIVE THRU OUT |
SMPTE292 / 75 Ω (BNC x 1) |
| Input/Output: IP CONT |
100BASE-TX
PoE+ input
Connection cable: LAN cable, max. 100 m (328 ft)
• When connecting the unit via a switching hub:
Straight cable or a cross cable (category 5 cable), STP (Shielded
Twisted Pair) cable recommended
• When connecting the unit directly: Crossover cable (category 5
cable), STP (Shielded Twisted Pair) cable recommended |
| Input/Output: SERIAL CONT (RJ-45) |
RS-422 (control signals for remote cameras), TALLY OUT
Connecting cable:
Straight cable (category 5e or better shielded cable),
max. 1000 m (3280 ft)
TALLY OUT: Open collector output (negative logic)
Maximum voltage resistance DC 24 V, Maximum current 50 mA |
| Input/Output: TALLY/GPIO 1 |
D-sub 25-pin, female, inch thread
TALLY IN : 10 inputs (for receiving photocoupler signals)
GPI : 6 inputs (for receiving photocoupler signals)
GPIO : 5 inputs (for receiving photocoupler signals)
or 5 outputs (open collector outputs, negative logic)
• Input/output switched with menu settings |
| Input/Output: GPIO 2 |
D-sub 25-pin, female, inch thread
GPI : 10 inputs (for receiving photocoupler signals)
GPIO : 10 inputs (for receiving photocoupler signals)
or 10 outputs (open collector outputs, negative logic)
• Input/output switched with menu settings
Reserve connectors:
2 connectors (For future expansion feature) |
| LCD Display |
7-inch Touch Panel GUI Monitor (WVGA (800×480)) |
| SD Memory Card Slot |
SDHC / SDXC Memory Card Slot x 1 |
| Connection Specifications |
| No. of Connectable Cameras |
200 (IP), 5 (RS422) |
| No. of Camera Selection Buttons |
10 |
| No. of Camera Groups |
20 (10 units per 1 group) |
| Memory |
| Preset Memory |
No. of memory presets: 100 |
| Tracing Memory: No. of cameras |
|
| Tracing Memory: Recording time, no. of memory settings |
Maximum 5 min. total per camera, maximum of 10 settings per camera |
| Other Functions |
| No. of User Assignable Buttons |
6 + up to 10 on the LCD menu |
| Pan / Tilt Speed Adjustment |
7 levels |
| Tally LED Display Color |
green / red |
