Shure SLXD35 Digital Camera-Mount Wireless Plug-On Transmitter System (J52: 558 to 602 + 614 to 616 MHz)
Product Highlights:
- Content Creation, Videos, Interviews
- Plug-On Transmitter with No Microphone
- 48 or 12V Phantom Power
- 1-Channel Receiver for Camera or Bag Use
- 118 dB Dynamic Range, 24-Bit Audio
- Reliable Predictive-Diversity Antennas
- 46 MHz Bandwidth, 1840 Frequencies
- Multi-Mic Mode for Complex Setups
- 8-Hour Transmitter, 5.5-Hour Receiver
- Shure SLXD35 Digital Camera-Mount Wireless Plug-On Transmitter System (J52: 558 to 602 + 614 to 616 MHz)
- Shure SLXD5 Digital Camera-Mount Wireless Microphone Receiver (J52: 558 to 602 + 614 to 616 MHz)
- Shure SLXD3 Digital Plug-On XLR Transmitter (J52: 558 to 602 + 614 to 616 MHz)
- Shure WA311 Cold Shoe Mount Adapter for SLXD5 Receiver
- 3.5mm TRS Cable for Camera
- 4 x AA Battery
- Limited 2-Year Manufacturer Warranty
Shure SLXD35 Digital Camera-Mount Wireless Plug-On Transmitter System (J52: 558 to 602 + 614 to 616 MHz)
Shure SLXD35-J52 SLXD35 Digital Camera-Mount Wireless Plug-On Transmitter System (J52: 558 to 602 + 614 to 616 MHz) The Shure SLXD35 offers videographers, journalists, documentary makers, and content producers a reliable wireless plug-on transmitter system that delivers crystal-clear digital sound quality while also being quick and easy to set up, even if you're using multiple mics on set. Built around a rugged, single-channel receiver that can be camera-mounted or used in an audio bag, the system offers a comprehensive feature set that ensures professional-sounding, broadcast-ready results for demanding news gatherers and creators. This configuration includes a handheld plug-on transmitter with a locking connector that will accommodate any XLR microphone of your choice (available separately).
Transparent Digital Sound, Dependable Performance, and Multi-Mic Mode
- The SLX-D delivers 24-bit digital audio with a fast transient response, a 20 Hz to 20 kHz frequency response, and a 118 dB dynamic range, resulting in clear, accurate sound.
- Operating far away from potential Wi-Fi interference in the 2.4 GHz band, this configuration of the system transmits in the J52: 558 to 602 + 614 to 616 MHz UHF band, with a 46 MHz tuning range and 1840 frequencies it can autoscan to ensure a clean wireless signal.
- Digital Predictive Switching Diversity uses a microprocessor to switch between the two antennas before dropouts occur.
- A low latency of 3.2 ms helps ensure your sound and picture are easy to properly sync.
- The SLX-D's spectrum-efficient digital transmission technology allows for up to 32 mics to be used at once.
- Great for shoots with several cameras and microphones, Multi-Mic Mode lets you scan and create a list of clean frequencies, which you can send to multiple receivers via IR.
- Each receiver will sync to the appropriate transmitter at the touch of a button; settings on the transmitters like the input gain and high-pass filter are also recalled.
- Multi-Mic Mode makes channel allocation easier and more efficient since the receivers aren’t all auto scanning and competing for open frequencies.
Plug-On Transmitter
- This configuration includes the SLXD3 plug-on transmitter with a secure, twist-locking XLR connector to accommodate a huge variety of microphone options, including handhelds and shotguns (available separately).
- The transmitter offers 12 and 48V phantom power options for condenser microphones.
- The SLXD3 features a -12 dB pad for use on loud sources and a +12 dB boost option for use on low-level sources.
- Use the mic offset gain function to fine-tune the input gain and ensure multiple mics are at similar volume levels.
- Engage the 150 Hz high-pass filter to reduce distracting, unwanted low-end for clearer speech.
- The rugged, all-metal transmitter features an OLED screen that shows essential information and includes a leather case with a belt clip.
- The system provides a transmission range up to 330'. A selectable 1/10/30mW RF output allows you to increase the transmission power to maximize the distance or to overcome interference, if necessary.
- Two AA batteries or an SB903 rechargeable battery (available separately) will power the unit for up to 8 hours.
Rugged Receiver Ready for Camera or Audio Bag
- Powerful and portable, the SLXD5 is a single-channel digital wireless receiver for on-camera cold shoe mounting and audio bag use featuring user-configurable front-panel controls and a bright OLED screen for key system function readouts and remaining battery life.
- Housed in a tough metal chassis with adjustable front-mounted antennas, the SLXD5 is a great fit for on-the-go shooting rigs.
- It offers adjustable gain control and dual 3.5mm outputs including a headphone monitor out and switchable line/mic output. Additional features include automatic frequency scanning and IR sync to easily link the transmitter and receiver to the same frequency.
- Two AA batteries or an SB903 rechargeable battery (available separately) will power the unit for up to 5.5 hours.
Optional Rechargeable Battery Management
- Adding the SB903 lithium-ion rechargeable battery, along with an SBC10-903 single charger, SBC203 dual-docking charger, or SBC80-903 8-bay charger offers a cost-effective and environmentally friendly alternative to throwing away AA batteries (batteries and chargers available separately).
- Using the SB903 battery and SBC203 charger simplifies the task of keeping multiple transmitters charged and ready—you can even recharge the battery while still in the transmitter or receiver.
- When powered by an SB903, the transmitter and receiver both display the remaining battery life in hours and minutes.
For bag use, the SBC-DC-903 battery eliminator (available separately) allows you to power the receiver from your mixer's battery.
- USB-C ports on the transmitter and receiver allow for battery recharging and direct powering.
A Variety of Mics and Transmitters Available
Shure offers numerous lavalier, headset, and handheld microphone options to adapt your SLX-D system as your needs evolve.
- The SLXD3 works with just about any XLR microphone on the market including Shure's VP64A and SM63L handheld mics as well as the VP89 shotgun.
- The SLXD1 is a rugged bodypack transmitter featuring a TA4M connector to accommodate a wide range of lavalier and headset mic options.
- The WL183 omnidirectional lavalier mic offers consistent pickup, even when the talent turns away from the mic.
- The WL185 cardioid lavalier mic provides a directional pickup pattern for less background sound.
- The WL184 supercardioid lavalier mic offers a very narrow, feedback-resistant pickup pattern for louder events.
- The discrete UL4 UniPlex subminiature cardioid lav provides directional pickup, exceptional clarity, and a discreet, low-profile appearance.
- If you need a waterproof option, the DL4 DuraPlex miniature lavalier features an IP57 rating for water and dust resistance. Its forgiving omnidirectional microphone capsule delivers a clear, transparent, full-range sound.
- The SLXD2 handheld transmitter is available with several mic capsules choices for presenters who prefer the flexibility of a handheld microphone.
| Shure SLX-D / SLXD3 Specs |
|---|
| System |
|---|
| Wireless Technology |
Digital UHF
|
| Number of RF Channel Frequencies |
1840
|
| Included Transmitters |
1x Plug-On
|
| Diversity |
True Digital Diversity
|
| RF Frequency Band |
J52: 558 to 602 MHz / 614 to 616 MHz
|
| RF Bandwidth |
46 MHz
|
| Frequency Step Size |
25 kHz
|
| RF Channel Scanning |
Auto-Scan
|
| Max Operating Range |
328' / 100 m
|
| Max Transmitters per Band |
32
|
| Built-In Recorder |
No
|
| Timecode Support |
Yes
|
| Mobile App Compatible |
No
|
| Sample Rate/Resolution |
24-Bit
|
| Latency |
3.2 ms
|
| Dynamic Range |
118 dBA (Typical)
|
| Encryption |
No
|
| THD |
<0.02 %
|
| Receiver |
|---|
| Receiver Type |
Camera-Mount
|
| Mounting Options |
Shoe-Mount (with Included Hardware)
|
| Antenna |
2x 1/4 Wave Flexible Whip, Fixed (Front-Mount)
|
| Number of Audio Channels |
1
|
| Audio I/O |
1x 1/8" / 3.5 mm TRS Female Balanced Mic/Line Output
1x 1/8" / 3.5 mm TRS Female Unbalanced Headphone Output
|
| Gain Range |
0 to +12 dB (3 dB Steps)
|
| Pad |
12 dB
|
| Audio Output Level |
1/8" / 3.5 mm Output:
+15 dB (Line Level, Balanced)
|
| Phantom Power Protection |
No
|
| Frequency Response |
20 Hz to 20 kHz +1/-2 dB (Dependent on Mic)
|
| Network I/O |
No
|
| USB/Lightning Connectivity |
1x USB-C Female (Bus Power, Charging)
|
| USB Class-Compliant |
No, USB Charging/Power Only
|
| Standalone Audio Interface Capable |
No
|
| Impedance |
1/8" / 3.5 mm Output:
450 Ohms (Balanced)
|
| Approximate RF Sensitivity |
-97 dBm
|
| Spurious |
Rejection: >75 dB
|
| Power Requirements |
Battery, Bus Power (USB)
|
| Battery Type |
2x AA (Included)
1x Shure SB903 (Not Included)
|
| Approx. Battery Life |
5.5 Hours
|
| Display & Indicators |
OLED (AF Level, Battery Status, Channel, Frequency, Group,
Menu Navigation, Metering, Multifunction, Output Level,
RF Level, Sync, Transmitter Battery Status)
|
| Housing |
Aluminum
|
| Operating Temperature |
0 to 122°F / -17 to 50°C
|
| Storage Temperature |
-20 to 165°F / -28 to 73°C
|
| Dimensions |
2.7 x 4.2 x 1" / 68 x 107 x 25.3 mm
|
| Weight |
0.4 lb / 182 g
|
| Transmitter |
|---|
| Transmitter Type |
Plug-On
|
| RF Output Power |
1 / 10 / 30 mW
|
| Audio I/O |
1x XLR 3-Pin Male Balanced Input (Locking)
|
| Included Cable Connector |
No
|
| Phantom Power |
+12 V
+48 V
|
| Muting |
Off/On Switch
|
| Audio Input Level |
+20.5 to -3.5 dBV
|
| Auto-Level Control |
No
|
| Gain Range |
0 +21 dB
|
| Signal Processing |
No
|
| Frequency Response |
20 Hz to 20 kHz (Dependent on Mic)
|
| Sync Method |
IR
|
| Antenna |
Internal
|
| Power Requirements |
Battery
|
| Battery Type |
2x AA (Included)
1x Shure SB903 (Not Included)
|
| Battery Charging Time |
1.25 to 5.5 Hours
|
| Approx. Battery Life |
8 Hours (Lithium Shure SB903)
|
| USB/Lightning I/O |
No
|
| Display & Indicators |
OLED (Battery Status, Channel, Group)
|
| Housing |
Metal
|
| Operating Temperature |
0 to 122°F / -17 to 50°C
|
| Storage Temperature |
-20 to 165°F / -28 to 73°C
|
| Dimensions |
1.6 x 5 x 1.6" / 41 x 126 x 41 mm
|
| Weight |
7.1 oz / 200 g
|
| Packaging Info |
|---|
| Package Weight |
2.55 lb
|
| Box Dimensions (LxWxH) |
16.6 x 8.3 x 3.1"
|
