| Sony VPL-PHZ50 Projector Specs |
| Display System |
| Display System |
3LCD system |
| Display Device |
| Size of Effective Display Area |
0.64” (16.3 mm) x 3 BrightEra LCD Panel, Aspect ratio: 16:10 |
| Number of Pixels |
6,912,000 (1920 x 1200 x 3) pixels |
| Projection Lens |
| Focus |
Manual |
| Zoom |
Manual (Approx. x 1.6) |
| Lens shift |
Manual, Vertical –35% to +55%, Horizontal: +/–15% |
| Throw Ratio |
1.23: 1 to 1.97: 1 |
| Light Source |
| Light Source |
Laser diode |
| Screen Size |
| Screen Size |
1.02 m to 7.62 m (40 in to 300 in) (measured diagonally) |
| Light Output*1 |
| Mode: Standard |
5,000 lm*2 |
| Mode: Standard (Center) |
5,400 lm*3 |
| Mode: Middle |
4,000 lm |
| Color Light Output*1 |
| Mode: Standard |
5,000 lm |
| Mode: Middle |
4,000 lm |
| Contrast Ratio (full white / full black)*1 |
| Contrast Ratio (full white / full black)*1 |
∞:1 |
| Displayable Scanning Frequency |
| Horizontal |
15 kHz to 92 kHz |
| Vertical |
24 Hz to 92 Hz |
| Keystone Correction (Max.) |
| Keystone Correction (Max.) |
Horizontal: +/–30 degrees Vertical: +/–30 degrees |
| Accepted Signal Resolution |
| Computer Signal Input |
Maximum signal resolution: 1920 x 1200 (4K/30p, 3840 x 2160 acceptable) |
| Video Signal Input |
NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p 4k/30p, 4k/25p, 4k/24p (4k means 3840) |
| INPUT / OUTPUT |
| INPUT A |
RGB / Y PB PR input connector: Mini D-sub 15-pin (female) Audio input connector: Stereo mini jack |
| INPUT B |
HDMI input connector: HDMI 19-pin, Digital RGB/Y PB PR, HDCP support Audio input connector: HDMI audio support |
| INPUT C |
HDMI input connector: HDMI 19-pin, Digital RGB/Y PB PR, HDCP support Audio input connector: HDMI audio support |
| INPUT D |
HDBaseT interface connector: RJ45, 4 play (Video, Audio, LAN (100BASE-TX), RS-232C) |
| VIDEO IN |
Video input connector: Phono jack (Composite) |
| OUTPUT |
Audio output connector: Stereo mini jack |
| REMOTE |
D-sub 9-pin (male) / RS232C |
| LAN |
RJ45, 10BASE-T / 100BASE-TX |
| USB |
TYPE-A x 1 (for F/W update), TYPEA for Power supply |
| Speaker |
| Speaker |
16 W |
| OSD Languages |
| OSD Languages |
27-language (English, French, German, Italian, Spanish, Portuguese, Japanese, Chinese, Korean, Russian, Dutch, Norwegian, Swedish, Thai, Arabic ,Turkish, Polish, Vietnamese, Farsi, Finnish, Indonesian, Hungarian, Greek, Czech, Slovak, Romanian) |
| Acoustic noise (Mode: Standard/Middle)*1 |
| Acoustic noise (Mode: Standard/Middle)*1 |
35 dB / 32 dB |
| Operating Temperature / Operating Humidity |
| Operating Temperature / Operating Humidity |
32°F to 109°F (0°C to 40°C) / 20% to 80% (no condensation) |
| Storage Temperature / Storage Humidity |
| Storage Temperature / Storage Humidity |
14 °F to +140 °F (–10 °C to +60 °C) / 20% to 80% (no condensation) |
| Power Requirements |
| Power Requirements |
AC 100 V to 240 V, 4.4 A to 1.9 A, 50 Hz / 60 Hz |
| Power Consumption |
| AC 100 V to 120 V |
440 W |
| AC 220 V to 240 V |
418 W |
| Power Consumption (Standby Mode) |
| AC 100 V to 120 V |
0.5 W (when “Standby mode” is set to “Low”) |
| AC 220 V to 240 V |
0.5 W (when “Standby mode” is set to “Low”) |
| Power Consumption (Networked Standby Mode) |
| AC 100 V to 120 V |
1 W (LAN), 16 W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard") |
| AC 220 V to 240 V |
1 W (LAN), 16 W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard") |
| Standby Mode / Networked Standby Mode Activated |
| Standby Mode / Networked Standby Mode Activated |
Approx. 2 Minutes |
| Dimensions (W x H x D) (without dust filter, protrusions) |
Dimensions (W x H x D) (without dust filter, protrusions) |
Approx. 16.61 x 3.94 x 13.11 in (422 x 100 x 333 mm) |
| Dimensions (W x H x D) |
| Dimensions (W x H x D) |
Approx. 16.61 x 5.08 x 13.31 in (422 x 129 x 338 mm) |
| Mass |
| Mass |
Approx. 15 lb (6.6 kg) |
| Supplied Accessories |
| Supplied Accessories |
RM-PJ8 Remote Commander |
| Notes |
| *1 |
The figures are approximate. They vary depending on the environment or how the projector is used. |
| *2 |
The value is in accordance with ISO 21118, and may differ depending on the actual unit. Brightness and contrast vary depending on use conditions and environments. |
| *3 |
The value is light output measured at center area of screen in Standard mode, and average of all products shipped. |