Tilta NUCLEUS-M: Wireless Follow Focus System
Product Highlights:
- 1000' Wireless Range
- Two Lens Drive Motors
- Motors Feature Integrated Receivers
- 0.8 MOD Drive Gears
- Focus, Iris, Zoom Hand Unit
- Motors Daisy-Chain for Power
- Right Handgrip with Focus Control
- Left Handgrip with Iris and Zoom Control
- Hard-Shell Waterproof Case Included
Tilta NUCLEUS-M: Wireless Follow Focus System
Tilta NUCLEUS-M: Wireless Follow Focus System
The Tilta Nucleus-M Wireless Lens Control` System features a 1000' transmission range, and comes with two lens drive motors with built-in wireless receivers, a FIZ hand controller, and two handgrips—one to control focus, and the other iris and zoom. The lens drive motors each feature a cine standard 0.8 MOD drive gear and two 7-pin connectors, which enables you to freely swap or interchange each motor. The motors power by daisy-chaining using the 7-pin cables, and each motor includes a 19mm rod clamp with 19 to 15mm reducing bushing.
| Wireless Range |
1000' / 304 m |
| Material of Construction |
Aluminum alloy, stainless steel, ABS plastic, rubber, Brazilian Rosewood |
| Batteries |
Required
Hand Controller: 2 x 18650
Handgrip: 2 x 18650 in each
Note: Battery must have a raised anode (positive) end, not a flat end |
| Power |
Batteries
3.7 VDC, 3000 mAh
Battery Charger
100 to 240 VAC, 50/60 Hz, 0.15 A
5 VDC, 2 A |
| Dimensions |
Motor
4.50 x 3.25 x 1.38" / 11.43 x 8.26 x 3.49 cm
Battery
Diameter: 0.6875" / 1.7463 cm
Length: 2.5625" / 6.5088 cm |
| Weight |
Motor
0.42 lb / 0.19 kg
0.50 lb / 0.22 kg (with 15mm rail adapter)
0.49 lb / 0.22 kg (with 19mm rail adapter)
FIZ Hand Unit
0.97 lb / 0.44 kg (with focus disk, no batteries)
1.16 lb / 0.53 kg (with focus disk and batteries)
Handgrips
Right Grip: 0.58 lb / 0.26 kg (no batteries or adapters)
Left Grip: 0.53 lb / 0.24 kg (no batteries or adapters)
Rosette
Rosette Male to Handle Grip Adapter: 0.16 lb / 0.07 kg
25 mm/30 mm Gimbal to Handle Grip Adapter: 0.10 lb / 0.04 kg |
