Vaxis ATOM 600 KV Wireless TX/RX Kit for RED KOMODO
Product Highlights:
- Wireless TX for RED KOMODO Camera
- Wireless ATOM 500 SDI Receiver
- Transmits Wireless Video up to 600'
- V-Mount, Supports up to 1080p60 Video
- Vaxis ATOM 600 KV Wireless TX/RX Kit for RED KOMODO
- 2 x Antenna
Vaxis ATOM 600 KV Wireless TX/RX Kit for RED KOMODO
Vaxis VA20-600KV-TR01 ATOM 600 KV Wireless TX/RX Kit for RED KOMODO
Wirelessly transmit and receive up to 1080p60 video to monitor your RED KOMODO camera with this ATOM 600 KV Wireless TX/RX Kit from Vaxis. This transmitter and receiver kit allows you to wirelessly transmit 1080p60 video signals to the Vaxis ATOM 500 SDI receiver with less than 80 ms latency. The transmitter sends a powerful line-of-sight signal up to 600'. The transmitter features one SDI input and SDI and HDMI loop outputs, and it also supports multicast over Wi-Fi to up to three mobile iOS devices using the Vaxis Vision app for monitoring. The ATOM 500 receiver features one SDI and one HDMI output for a monitor, switch, or other video destination. They both feature a bright, clear OLED display and both feature smart cooling fan that can be turned on and off to prevent noise during your production. The transmitter mounts onto the KOMODO's dual-battery plate and powers using a V-mount plate for a separately available high-capacity V-mount battery, and it will also pass through power to the camera. The plate can be installed in a horizontal or vertical configuration that can be changed by the user by removing four screws on the battery plate. The receiver is powered using a USB Type-C power source or by using its L-series battery plate.
| Vaxis Atom 600 KV Specs |
|---|
| Wireless |
|---|
| Wireless Range |
600' / 182.9 m (Line-of-Sight) |
| # of Channels |
13 |
| Frequency Range |
US: 5.1 to 5.9 GHz |
| Latency |
< 80 ms |
| RF Power |
17 dBm |
| RF Sensitivity |
-80 dBm |
| Wireless Video Compression |
Compressed |
| Interfaces |
|---|
| Transmitter Video Connectors |
1 x BNC (3G-SDI) Input
1 x HDMI Loop Output
1 x BNC (3G-SDI) Loop Output |
| Receiver Video Connectors |
1 x BNC (3G-SDI) Output
1 x HDMI Output |
| Receiver Other I/O |
1 x USB Type-C Input |
| Embedded Audio |
HDMI: 2-Channel
SDI: 2-Channel |
| Format Support |
|---|
| Broadcast System Compatibility |
NTSC, PAL |
| Video Format |
HDMI:
1080p at 24, 25, 30, 50, 60 fps
1080i/720p at 50, 60 fps
SDI/BNC:
1080p at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps
1080PsF at 23.98, 24, 25, 29.97, 30 fps
1080i at 50, 59.94, 60 fps
720p at 50, 60 fps |
| Timecode |
Yes |
| LUT Support |
None |
| Display |
|---|
| Transmitter Panel Type |
OLED |
| Receiver Panel Type |
OLED |
| Power |
|---|
| Transmitter Battery Support |
1 x V-Mount |
| Receiver Battery Support |
1 x Sony L-Series / NP-F Type |
| Transmitter Power Consumption |
Device: 5 VDC (6.5 W) |
| Receiver Power Consumption |
Device: 5 VDC |
| General |
|---|
| Transmitter Dimensions |
3.8 x 2.9 x 2" / 96.5 x 74 x 50.4 mm |
| Receiver Dimensions |
4.13 x 2.5 x 0.79" / 10.5 x 6.35 x 2 cm |
| Transmitter Weight |
14.1 oz / 400 g |
| Receiver Weight |
4.6 oz / 130 g |
