Vinten V4106-0001 Vision blue3 Fluid Head
Product Highlights:
- 6.6-14.6 lb Payload
- 75mm Ball
- Continuously Adjustable Counterbalance
- Continuously Adjustable Tilt Drag
- ±90° Tilt Range
- Sliding Balance Plate
- L/R Pan Handle Rosettes
- Illuminated Bubble Level
- Vinten Vision blue3 Fluid Head
- Camera Plate
- 1/4" Screw
- 2 x 3/8" Screw
- Pan Handle
- Bowl Clamp Knob
- Limited 1-Year Warranty
Vinten V4106-0001 Vision blue3 Fluid Head
Vinten V4106-0001 Vision blue3 Fluid Head
Featuring continuously adjustable counterbalance and tilt drag, the Vinten Vision blue3 Fluid Head is a suitable companion to cameras weighing from 6.6 to 14.6 pounds. Counterbalance and tilt drag can be set precisely to your setup so you don't have to deal with "almost" perfect balance. Cameras down to 4.6 pounds are supported with the separately available blueBridge accessory.
Using the 75mm standard ball mount, this head can be balanced atop a tripod with a 75mm bowl. Using bubble level, you can properly frame your horizon lines for perfect horizontal panning. The bubble level itself is illuminated for visibility in dim environments. One press of the bubble level yields 15 seconds of illumination to save battery.
The sliding balance plate included with this head is compatible with the included 1/4"-20 and 3/8"-16 screws for locking down DSLRs, mirrorless cameras, or camcorders. A safety catch ensures that your camera won't fall off the head while the plate is loose. For controlling the head, a fixed-length pan handle is included, and it can be mounted on either side of the head on locking rosettes.
| Camera Plate |
|---|
| Camera Plate Features |
Sliding Balance Plate |
| Tripod Platform |
|---|
| Base Mount |
75 mm Half Ball |
| Pan & Tilt |
|---|
| Drag Control |
Tilt: Continuous |
| Vertical Tilt |
+90° to -90° |
| Physical |
|---|
| Load Capacity |
6.6 to 14.6 lb / 3 to 6.6 kg |
| Counter Balance |
Continuous |
| Weight |
5.3 lb / 2.4 kg |
