Waterbird MS XL mkII SK 200 Camera Slider (Slidekamera Version)

Waterbird MS XL mkII SK 200 Camera Slider (Slidekamera Version)

Product Highlights:

• Provides smooth movement while remaining silent
• Configure any length/curve you need
• XL Motion Controller with IP, DMX, & Bluetooth connectivity included
• Easy transport and quick setup

• Waterbird MS XL mkII SK 200 Camera Slider (Slidekamera Version)
• 2 meters (6.56 ft) of Track
• Motorized Carriage with Motion Controller
• Track Finishers

Waterbird MS XL mkII SK 200 Camera Slider (Slidekamera Version)

Waterbird MSXMKII200 MS XL mkII SK 200 Camera Slider (Slidekamera Version)

The MS XL was built to satisfy the need for user configurable curves and changeable length with one simple system.

The Track segments have an axis distance of 15 centimeters (5.91 inches), so you can configure any length on this basis. Tracks are either straight or curved, or you can opt to go from a straight track into the curve of your choice - configure it however you like within minutes.

The Patented System with 15cm rail distance (three times as wide as the Multi Slider or MS SWIFT) comes with a strong BLDC motor for a high load capacity, which is whisper silent and provides smooth movements. The XL Motion controller offers IP, DMX, and Bluetooth connectivity.

Highly Portable and Quick Setup

The modular system of the MS XL allows an easy transport and quick setup. The track can be divided into small segments that are connected with screws and the rails can be rolled up for transport.

Perfect Stability

Each segment of the MS XL has a 3/8″-16 mounting port on the bottom for tripod mounting to ensure highest stability while the carriage is moving. Mounting port distance is 15 cm.

XL Motion Controller

The XL Motion Controller with IP, DMX, and Bluetooth connectivity allows integration into any system. Joystick or Pedal control in combination with our HMI unit or PHOENIX controller.

Waterbird MS XL Specs MS XL Carriage Carriage Dimensions 14.5 x 7.8 x 3.9 in / 37 x 20 x 10 cm Track Dimensions 39.4 x 7.1 x 2.4 in / 100 x 18 x 6 cm Motorized Yes Travel Size Track can be divided to small segments – travel and packing size can be individually adjusted Weight 8.27 lbs / 3.75 kg (4.9 lbs / 2.215 kg without motor and control unit) Load Capacity Horizontal Use 15 kg Maximum Speed 1.4 m/sec. Mounting Options on Bottom 3/8″-16 mounting port on the bottom every 10 cm Mounting Options on Top 3/8″-16 mounting screw Working Mechanism Non-Friction Ball Bearings on high-end special composition plastic tracks Temperature Limits -20° to +40° Celsius Smallest possible Radius 1000 mm Control Unit and Motor Housing Measurements 4.84 x 3.07 x 1.69in (123 x 78 x 43mm) without connectors and mounting brackets Housing Material aluminum, black anodized Operating Parameters Temperature Range -20°C to +40°C (-4°F to 104°F) Maximum Relative Humidity 90%, noncondensating Ports & Connection Supply Connector Molex 039301020 Supply Voltage 12 –48 Vdc stabilized voltage Supply Current 200mA without external load 12V Out Stabilized 12Vdc Output. max output current 2A (if no Stepper Motor used) max output current 1A (if Stepper Motor used) output switchable and current monitored by Software can be used for auxiliary equipment on Slider e.g. cameras, Wifi or RF equipment Motor Output 1 Molex 039301080 For connecting to a Teknic Clearpath SDSK Series Motor 22-05-3041 (fitting to Motor Connector Molex 22-01-3047) Motor Output 2 Molex 22-05-3041 For connecting a bipolar 4-wire stepper Motor, maximum output current 1A minimal isolation voltage of motor >16V Camera Trigger Port 2,5mm (3/32”) Stereo Klinke / TRS Sleeve: GND, Ring: Focus, Tip: Shutter Internal pull-up 3,3V, Maximal pullup Voltage: 5Vdc Auxiliary Port 3,5mm (1/8”) Stereo Klinke / TRS Sleeve: GND, Ring: Aux 2 In/Out, Tip: Aux 1 In/Out Internal pull-up 3,3V, Maximal pullup Voltage: 5Vdc USB Port USB Micro B Used for Firmware Updates and Parametrization 5Vdc supply for electronics, no supply of motors via USB DMX in 3 -pole male XLR receptacle Input for DMX control Signal. Standard DMX512 Signal with 250kbaud supported DMX out 3-pole female XLR receptacle Output for DMX control signal. Loop through of input signal Network RJ45 Ethernet Connector For integrating in IP based control Systems. *planned for future Software versions

Compatible Cameras Canon E3 (3/32″ TRS) Canon: 60D, 70D, All the ‘Rebels’ (500D, 550D, 600D etc), T41, T3i, T2i, T1i, Kiss, EOS-30, 33, 50, 50E, 300Vss, 300, 3000, 1000D, 1100D Pentax: K5, K7, *istD, *istDL, *istDs, *ist, *istDL2, *K100D, K110D, K10D, K200, K20D Samsung: GX, 1L, GX 1S, GX-10, GX-20 Contax: 645, N1, NX, N Digital Canon N3 Canon: 10D, 20D,30D, 40D, 50D, 7D, 6D, 1D Mark II, 1Ds Mark II, 1D Mark III, 1Ds Mark III, 1D Mark IV, 5D, 5D Mark II & 5D Mark III, 5D Mark IV, 1DX, 1DS, 1DC, 1V, 1VHS Nikon 10-pin/DC0 Nikon: D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D300, D700, D800, F90x, F90, F100, F6, F5 Kodak: DCS-14n Fujifilm: S3 Pro, S5 Pro Nikon 3N/DC2 Nikon: D90, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D7000, D7100, D600, D610, D750, Df, D5500, D7200, D7500, Coolpix P7700, COOLPIX A, COOLPIX P7800 Nikon DC1 Nikon: D70S, D80 Olympus UC1 Olympus: e520, e510, e420, e410, e400, e300, sp-570 uz, sp-560 uz, sp-550 uz, sp-510 zu, E-P2, E-P1, E-620, E-30, E30 E100 E400 E410 E420 E450 E510 E520 E550 E600 E620 SP-550UZ SP-560UZ SP-565UZ SP-570UZ SP-590UZ SP-810UZ E-P1 E-P2 E-P3 E-P5 E-PL2 E-PL3 E-PL5 E-PL6 E-PL7 Stylus 1 E-PM1 E-PM2 XZ-1 EM1 EM5 EM5II EM10 SZ-30MR SZ-20 SZ-11 Panasonic 4-Pole/L1 Panasonic: Lumix DMC-FZ1000, -FZ200, -FZ100, -GH4, -G5, -G6, -GX7, -G1, -G2, -G3, -G10, -GF1, -GH1, -GH2, -GH3, -GH4, -GH5, -GX7, -L10, -L1, -FZ50, -FZ20, -FZ20K, -FZ25, -FZ30, -FZ50, -FZ100, -FZ200, -FZ150, LC1 Leica: Digilux 1, DIGILUX 2, DIGILUX 3 D-LUX3 D-LUX2 D-LUX1, V-LUX1, V-LUX2 Sony Alpha S Sony: α100, α200, α300, α350, α450 α500 α550 α560 α580 α700 α850 α900, α33 α35 α37 α55 α57 α65 α77 α99 Konica Minolta: 7D, 5D, DiMAGE 9, 7HL 7U 7, 5, 4X, 3 Sony Alpha S2 Sony: A7R, A7S, A58, NEX-3NL, A6000, A5000, HX300, RX100, Alpha 7, 7R, 7S, 58, 3000, 5000, 5100, 6000, Cyber-shot DSC-HX50V, HX60, HX60V, HX300, HX400, HX400V, RX10, RX100M2, RX100M3, NEX-3N Fuji RR-90 Fujifilm: X-T1, X-T10, X-E2, X-M1, X-A2, X-A1, X100T, X30, XQ2, XQ1, and FinePix S1 Cameras, GFX 50S Fuji RR-80 FujiFilm: FinePix HS20EXR, HS22EXR, HS25EXR, HS28EXR, HS30EXR, HS33EXR, HS38EXE, S2, S5, S20 Pro, S100FS, S200EXR, S205EXR, S9000, S9100, S9500, S9600, IS-1, E-X1, X-S1, X300 Samsung NX Samsung: NX20, 210, 1000, NX-Series