Yamaha 15" 1100W 2-Way Active Loudspeaker
Product Highlights:
- Bass-Reflex ABS Cabinet
- 15" Woofer
- 1.75" Compression Tweeter
- H x V: 90° x 60°
- Biamplified Class-D Design
- 1100W Peak Output
- FIR-X Crossover
- XLR, 1/4", and RCA Inputs
- XLR Thru and Output
- 35mm Tilt Pole Socket and M10Fly Points
- Yamaha DXR15mkII 15" 1100W 2-Way Active Loudspeaker
- Power Cord
- Limited 7-Year Warranty Against Materials or Workmanship
Yamaha 15" 1100W 2-Way Active Loudspeaker
Yamaha DXR15MKII 15" 1100W 2-Way Active Loudspeaker
The Yamaha DXR15mkII is a 15" 1100W 2-Way active loudspeaker which provides clear audio and extremely high output levels in an unobtrusive and durable design, ideal for live sound applications that require wide bandwidth audio reproduction. The cabinet has a rugged ABS construction with a bass-reflex design for enhanced bass performance with reduced turbulence. The high-power 15" woofer and 1.75" compression tweeter offer high-resolution audio with a wide frequency response and deep bass. Integrated DSP uses a FIR-X linear phase filter for an ultra-smooth crossover, while the protection circuits optimize and protect driver performance.
The speaker has a biamplified Class-D design that provides a combined peak output power of 1100W for a strong performance with minimal distortion. The integrated D-contour processor allows you to use the speaker as a main/FOH speaker or as a stage monitor. The rear panel has XLR, 1/4", and RCA inputs, as well as XLR thru and output connectors for wide compatibility with a variety of professional sound systems and devices.
The speaker can be placed on a floor or stage, but also has useful mounting options. A dual 35mm pole socket allows you to mount the speaker on top of a subwoofer with horizontal or 7° tilt toward the floor, while M10 fly points allow suspended installation. An optional U-bracket is available separately for wall mounting. The Yamaha DXR15mkII ships with a power cord.
| Yamaha DXR15MKII Specs |
|---|
| PA Speaker |
|---|
| Configuration |
Active 2-Way |
| Enclosure Type |
Bass-Reflex Loudspeaker |
| Total Power Capacity |
1100 W Peak
700 W RMS |
| Amplifier Power Rating |
LF:
950 W Peak
600 W RMS
HF:
150 W Peak
100 W RMS |
| Amplifier Class |
Class-D |
| Drivers |
|---|
| HF Driver |
1 x 1.75" / 44.45 mm Compression Driver with 1" / 25 mm Throat |
| LF Driver |
1 x 15" / 38.1 cm Woofer |
| LF Voice Coil |
2.5" / 6.35 cm |
| Magnet |
HF:
Neodymium
LF:
Ferrite |
| Performance |
|---|
| Frequency Range |
49 Hz to 20 kHz -10 dB |
| Maximum SPL |
134 dB SPL |
| Coverage Angle |
90° H x 60° V (Horn) |
| Input Sensitivity |
Line Input:
+1 dBu (Max)
Mic Input:
-32 dBu (Max)
Line Input:
-13 dBu (Max)
Mic Input:
-22 dBu (Center)
Line Input:
+11 dBu (Center)
Line Input:
-3 dBu (Center) |
| Max Input Level |
Line Input:
+24 dBu (Balanced)
Mic Input:
+20 dBu (Balanced)
Line Input:
+16 dBu (Unbalanced) |
| I/O Impedance |
XLR Mic Input:
12 Kilohms (Balanced, Mono)
XLR Line Input:
8 Kilohms (Balanced, Mono)
1/4" TRS Line Input:
40 Kilohms (Unbalanced, Stereo)
20 Kilohms (Unbalanced, Mono) |
| Protections |
AC Coupling, Crossover Overload, DC Fault |
| Connectivity |
|---|
| Audio I/O |
1 x XLR 3-Pin Input
2 x 1/4" TS Input
2 x RCA Input
1 x XLR 3-Pin Thru
1 x XLR 3-Pin Link Output |
| Signal Processing |
|---|
| Crossover |
2.1 kHz |
| Filters |
2 x High-Pass:
100 Hz, 24 dB/Octave
120 Hz, 24 dB/Octave |
| Dynamic Processing |
Compression, Multiband Limiter |
| Digital Signal Processing |
48-Bit DSP: FIR Filter, Venue Settings |
| Max Sample Rate/Resolution |
48 kHz / 24-Bit |
| Power |
|---|
| AC Input Power |
Universal:
100 to 240 VAC, 50 / 60 Hz |
| AC Power Connector |
1 x IEC Input |
| Power Consumption |
110 W |
| Physical |
|---|
| Mounting |
2 x M10 (Top)
1 x M10 (Rear)
1 x 1.38" / 35 mm Pole Socket (Dual Angle) |
| Monitor Angle |
50° |
| Handles |
2 x Each Side |
| Cooling |
Fan (Variable Speed) |
| Construction Material |
ABS |
| Dimensions |
17.5 x 27.6 x 15" / 445 x 700 x 380 mm |
| Weight |
48.1 lb / 21.8 kg |
