Analog Input Characteristics |
Input Connectors |
Channels 1-4: 4x Combo XLR-1/4" / 6.35 mm Channels 5/6: 1x XLR, 2x 1/4" / 6.35 mm Channels 7/8: 1x XLR, 2x 1/4" / 6.35 mm Channels 9/10: 1x XLR, 2x RCA Channels 11/12: 1x XLR, 2x RCA, 1x 1/8" / 3.5 mm stereo mini-jack |
Load Impedance |
Channels 1-4 (XLR Mic/Line): 3 kOhms actual, 50-600 Ohms nominal with mics Channels 1-4 (1/4" Mic/Line): 8 kOhms, 600 Ohms line Channel 4 (1/4", Hi-Z Engaged): 1 MOhms actual, 10 kOhms lines nominal Channels 5-12 (XLR): 2 kOhms actual, 50 - 600 Ohms lines nominal Channels 5-12 (1/4", RCA, 1/8"): 10 kOhms actual, 600 Ohms nominal |
Input Level |
Sensitivity Channel 1-4 (XLR, Mic): -60 dBu (0.775 mV) Channel 1-4 (XLR, Line): -30 dBu (24.5 mV) Channel 1-4 (1/4", Mic): -50 dBu (2.45 mV) Channel 1-4 (1/4", Line): -20 dBu (77.5 mV) Channel 4 (Hi-Z Engaged, Mic): -50 dBu (2.45 mV) Channel 4 (Hi-Z Engaged, Line): -20 dBu (77.5 mV) Channels 5-12 (XLR): -60 dBu (0.775 mV) Channels 5-8 (1/4"): -20 dBu (77.5 mV) Channels 9-12 (RCA, 1/8"): -8 dBu (316 mV)
Nominal Channel 1-4 (XLR, Mic): -43 dBu (5.48 mV) Channel 1-4 (XLR, Line): -13 dBu (173 mV) Channel 1-4 (1/4", Mic): -33 dBu (17.3 mV) Channel 1-4 (1/4", Line): -3 dBu (548 mV) Channel 4 (Hi-Z Engaged, Mic): -33 dBu (17.3 mV) Channel 4 (Hi-Z Engaged, Line): -3 dBu (548 mV) Channels 5-12 (XLR): -43 dBu (5.48 mV) Channels 5-12 (1/4", RCA, 1/8"): -3 dBu (548 mV)
Maximum Before Clip Channel 1-4 (XLR, Mic): -15 dBu (138 mV) Channel 1-4 (XLR, Line): +15 dBu (4.36 V) Channel 1-4 (1/4", Mic): -5 dBu (436 mV) Channel 1-4 (1/4", Line): +25 dBu (13.8 V) Channel 4 (Hi-Z Engaged, Mic): -5 dBu (436 mV) Channel 4 (Hi-Z Engaged, Line): +20 dBu (7.75 V) Channels 5-12 (XLR): -15 dBu (138 mV) Channels 5-12 (1/4", RCA, 1/8"): +25 dBu (13.8 V)
|
Analog Output Characteristic |
Output Connectors |
Stereo Out (L/R): 2x 1/4" / 6.35 mm balanced Aux Sends (1/2): 2x 1/4" / 6.35 mm balanced Rec Out (L/R): 2x RCA unbalanced |
Impedance |
Stereo Out (L/R): 600 Ohms actual, 10 kOhms Lines Aux Sends (1/2): 600 Ohms actual, 10 kOhms Lines Rec Out (L/R): 600 Ohms actual, 10 kOhms Lines |
Output Level |
Stereo Out (L/R): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping Aux Sends (1/2): +4 dBu (1.228 V) nominal, +20 dBu (7.75 V) max before clipping Rec Out (L/R): -10 dBV (0.308 V) nominal, +18 dBV (7.75 V) max before clipping |
Loudspeaker Outputs |
Connectors |
Speakers A/B: Neutrik speakON NL4, 1/4" / 6.35 mm phone jack |
Impedance |
Actual Source Impedance: < 0.1 Ohms For Use with Nominal: 4 Ohm speakers, 8 Ohm speakers |
Output Level |
4 Ohm Speakers: 500 W (1 Hz THD+N < 1%), 630 W (1 kHz THD+N < 10% [CEA2006]) 8 Ohm Speakers: 370 W (1 Hz THD+N < 1%), 460 W (1 kHz THD+N < 10% [CEA2006]) |
General |
Output Power |
1 kHz THD+N < 10% (CEA2006): 630 W + 630 W (4 Ohms), 460 W + 460 W (8 Ohms) 1 kHz THD+N < 1%: 500 W + 500 W (4 Ohms), 370 W + 370 W (8 Ohms) |
Frequency Response |
Frequency Response Refer to the nominal output level @ 1 kHz Input to Speakers: +1/-3 dB (40 Hz to 20 kHz) Input to Stereo Out, Aux 1/2 Send: +0.5/-1.0 dB (20 Hz to 20 kHz) |
THD + N |
Input to Speakers: 0.1% @ 10 W (40 Hz to 20 kHz), 0.05% @ 50 W (1 kHz) Input to Stereo Out, Aux 1/2 Send: 0.03% @ +14 dBu (20 Hz to 20 kHz), 0.007% @ +20 dBu (1 kHz) |
Crosstalk |
(1 kHz): -85 dB |
Input Channels |
Mono (Mic/Line): 8 Stereo: (Line): 4 Total: 12 |
Output Channels |
Speakers: A/B Aux 1 Send Aux 2 Send Stereo Out: L/R Rec Out: L/R |
Bus |
Stereo: 1 Aux: 2 (including FX) |
Pad |
Channels 1-4: 30 dB |
Hi-Z Input |
Channel 4: Supported |
HPF |
High Pass Filter (Channels 1-3): 80 Hz, -12 dB/octave |
EQ Section |
High: 10 kHz +15/-15 dB Mid: 2.5 kHz +15/-15 dB Low: 100 Hz +15/-15 dB |
Compressor |
Single knob compressor |
Audio Level Meter |
7 points (-20, -10, -6, 0, +6, +10, Peak) |
Built-in Effects |
SPX Algorithm: 24 programs |
Output Channel Function |
Master EQ (Speech to Music) Monitor EQ Feedback Suppressor |
Phantom Power |
+48 V |
Footswitch Input |
Effect mute on/off |
Protection |
Load Protection: DC-fault Amplifier Protection: Overheat protection, overcurrent protection, integral power protection Power Supply Protection: Overheat protection, overcurrent protection |
Power |
Power Requirements: 100-240 VAC, 50/60 Hz Power Consumption: 42 W (Idle) / 210 W (1/8 power) |
Operating Temperature |
32 to 104°F / 0 to 40°C |
Dimensions (W × H × D) |
18.3 x 12.1 x 12.8" / 464.8 x 307.3 x 325.1 mm |
Weight |
20.9 lb / 9.5 kg |