Yamaha PX10 Stereo Power Amplifier (1000W at 8 Ohms)
Product Highlights:
- 1000W per Channel at 8 Ohms
- Efficient Class-D Amplifier
- Custom LSI Chip with PLL Technology
- Digital Routing of Inputs & Outputs
- XLR, 1/4", SpeakON & Binding Post
- PEQ, Crossover, Filters, Delay
- D-Contour Multi-Band Dynamic Processing
- Yamaha PX10 Stereo Power Amplifier (1000W at 8 Ohms)
- AC Power Cord
- USB Cap
- Limited 3-Year Warranty
Yamaha PX10 Stereo Power Amplifier (1000W at 8 Ohms)
Yamaha PX10 Stereo Power Amplifier (1000W at 8 Ohms)
The Yamaha PX10 Stereo Power Amplifier delivers 1000W at 8 Ohms in a lightweight chassis and is suitable for a wide variety of sound-reinforcement applications. Part of the company's PX Series of power amplifiers, it features a Class-D engine with a single custom LSI chip, and uses PLL technology for higher efficiency and lower noise.
| Output Power |
1000 W per channel at 8 Ohms
1200 W per channel at 4 Ohms
700 W per channel at 2 Ohms |
| Amplifier Type |
Class-D, balanced output circuit (BLT) |
| THD + N |
0.1% at 1 kHz, 10 W
0.3% at 1 kHz, half power |
| Frequency Response |
20 Hz to 20 kHz, ±1.0 dB (1 W at 8 Ohms) |
| Crosstalk |
≤ -60 dB |
| S/N Ratio |
101 dB |
| Voltage Gain / Sensitivity |
At 8 Ohms, Maximum Volume:
32.0 dB / +9.3 dBu (Gain Setting: 32 dB)
26.0 dB / +15.3 dBu (Gain Setting: 26 dB)
37.3 dB / +4 dBu (Gain Setting: 4 dB)
27.3 dB / +14 dBu (Gain Setting: 14 dB) |
| Cooling |
2 x 16-step variable-speed fan (front-to-rear flow) |
| Maximum Input Voltage |
+24 dBu |
| Input Impedance |
20 kOhms (Balanced)
10 kOhms (Unbalanced) |
| Sampling Frequency |
48 kHz |
| Converters |
A/D: 24-bit linear, 128 times over-sampling
D/A: 24-bit linear, 128 times over-sampling |
| Signal Processing |
- Input summing
- D-contour: FOH / MAIN
- Monitor
- OFF
- Delay: 0 to 74 ms
- HPF / LPF: cutoff frequency 20 Hz to 20 kHz with polarity control
- Speaker Processor: 6-band PEQ / limiter / delay
|
| Latency |
1.5 ms (analog input to speaker) |
| User Presets |
8 user presets |
| Factory Presets |
Speaker presets for Yamaha passive speakers |
| Connectors |
Analog Input
2 x XLR-3-31
2 x 1/4 TRS
Speakers
2 x Neutrik SpeakOn NL4
2 x pairs of binding posts
2 x 1/4" TS
1 x AC inlet with AC cord clamp
1 x USB 2.0 Type-A (female) |
| Power Requirements |
120 VAC / 60 Hz |
| Power Consumption |
310 W at 4 Ohms, 1/8 maximum power
60 W at 4 Ohms, Idle |
| Operating Temperature |
32 to 104°F / 0 to +40°C |
| Storage Temperature |
-4 to 140°F / -20 to +60°C |
| Dimensions (W × H × D) |
18.90 x 3.46 x 15.25" / 480 x 88 x 387.4 mm |
| Weight |
16.31 lb / 7.4 kg |
| Packaging Info |
|---|
| Package Weight |
20.5 lb |
| Box Dimensions (LxWxH) |
21.75 x 21.75 x 7.5" |
