Yamaha Portable PA System with Bluetooth
Product Highlights:
- 680W Power Output
- Detachable 10 Channel Mixer
- 2 x Two-Way Bass Reflex Speakers
- All-In-One Portable PA System
- Fast and Easy Set Up
- SPX Digital Reverb
- Phantom Power
- Single Knob Master EQ
- Built-In Feedback Suppressor
Yamaha STAGEPAS 600BT Portable PA System with Bluetooth
- Cover Panel
- 6.6' Power Cord
- (2) 19.7' Speaker Cables
- (12) Non-Skid Pads
- (2) Ferrite Cores
- (2) Cable Ties
- Limited 1-Year Warranty
Yamaha Portable PA System with Bluetooth
Yamaha STAGEPAS 600BT Portable PA System with Bluetooth
The STAGEPAS 600BT Portable PA System with Bluetooth from Yamaha is an all-in-one lightweight PA that is compact enough to carry by hand. It features 680W of output power, a detachable 10-channel mixer, and is flexible enough to be used in a range of environments and applications.
The STAGEPAS PA is equipped with a Bluetooth input for wireless audio streaming from smartphones or tablets. Other features include: SPX digital reverb, 1-knob master EQ, and a feedback suppressor to avoid the uncomfortable feedback that plagues so many sound reinforcement novices and professionals. Add more bottom end to your system by connecting a powered subwoofer (sold separately).
Finally, delivering 680W of power respectively, the STAGEPAS system offers a major boost in performance, allowing you to meet the demands of a wider range of situations.
| Type |
Powered mixer with 2 passive speakers |
| Channel |
10 |
| Input Channels |
Hi-Z Switch: CH4, ST/Mono switch: Ch 5/6-9/10 |
| Output Channel Function |
Feedback suppressor, 1-knob master EQ |
| I/O |
|---|
| Inputs |
4 x mono mic/line + 4 mono /2 stereo line |
| Phantom Power |
+30 V (Ch1, 2) |
| Outputs |
Speakers out (L, R)
Monitor out (L/Mono, R)
Subwoofer out (mono) with auto HPF |
| Bluetooth |
Bluetooth ver 4.1, A2DP ver 1.2, Maximum Range: Approx. 32.8' / 10.0 m |
| Other Controls |
Reverb foot switch |
| Input Channel Function |
Hi-Z Channel 4
Low Shelving: 100 Hz
Mid Peaking: 2.5 kHz |
| DSP |
SPX digital reverb (4 program, parameter control) |
| Maximum Output |
At 4 Ohms: 680 W (340 W + 340 W) (dynamic), 560 W (280 W + 280 W) (continuous) |
| EQ Mid |
Mid Peaking: 2.5 kHz |
| General |
|---|
| Speaker Type |
Two-way, bass-reflex speakers |
| Frequency Range |
55 Hz to 20 kHz |
| Nominal Coverage Angle |
H: 90°
V: 60°
Floor Monitor: 50° |
| Components |
10" / 25 cm cone
1.4" / 3.56 cm voice coil compression driver |
| Maximum Output Level |
129 dB SPL / speaker |
| Power Requirements |
100 to 240 VAC, 50/60 Hz |
| Power Consumption |
35 W (Idle), 100 W (1/8 power) |
| Pole Socket |
34.8 to 35.2 mm pole socket with StageLok |
| Other Features |
Handle: 1 x top |
| Dimensions (W x H x D) |
Speaker: 13.2 x 21.5 x 12.6" / 33.5 x 54.5 x 31.9 cm
Mixer: 13.7 x 7.8 x 5.3" / 34.8 x 19.7 x 13.5 cm |
| Weight |
56.4 lb / 25.6 kg |
