| AJA 12G-AM Specs |
|---|
| Video Formats |
(4K) 4096x2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(UltraHD) 3840x2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(2K) 2048x1080p 23.98, 24, 25, 29.97, 30,50, 59.94, 60
(HD) 1920x1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
(HD) 1920x1080i 50, 59.94, 60
(HD) 1280x720p 50, 59.94, 60*
(SD) 625i 50
(SD) 525i 59.94
RGB and YCbCr, 4:4:4/4:2:2, 10-bit
Note: Raster and frame rate dependent, please see 12G-AM Video Formats in Documents and Manual. |
| Video Input Digital |
1x 12G-SDI BNC, SMPTE 259/292/424/2081/2082
Single Link SD/HD/2K/UltraHD/4K
Single Link 3G-SDI Level A or B-DL, SMPTE 425 |
| Fiber Input (12G-AM-R, 12G-AM-TR) |
1x 12G-SDI Fiber LC connector, SMPTE 297/259/292/424/2081/2082
Wavelength: Rx 1260 nm (min), 1620 nm (max)
Optical Sensitivity: -10 dBm (min 12 Gbps), -14 dBm (min 3 Gbps)
Overload Power: -2 dBm (min) |
| Fiber Input (12G-AM-R-ST) |
1x 12G-SDI Fiber ST connector, SMPTE 297/259/292/424/2081/2082
Wavelength: Rx 1260 nm (min), 1620 nm (max)
Optical Sensitivity: -10 dBm (min 12 Gbps), -14 dBm (min 3 Gbps)
Overload Power: -2 dBm (min) |
| Video Output Digital |
1x 12G-SDI BNC, SMPTE 259/292/424/2081/2082
Single Link SD/HD/2K/UltraHD/4K
Single Link 3G-SDI Level A or B-DL, SMPTE 425 |
| Fiber Output (12G-AM-T, 12G-AM-TR) |
1x 12G-SDI Fiber LC connector, SMPTE 297/259/292/424/2081/2082
Nominal Wavelength: Tx 1260 nm (min), 1310 nm (typ), 1360 nm (max)
Optical Power: -5 dBm (min), 0.5 dBm (max)
Extinction Ratio: 5.4 dB (min) |
| Fiber Output (12G-AM-T-ST) |
1x 12G-SDI Fiber ST connector, SMPTE 297/259/292/424/2081/2082
Nominal Wavelength: Tx 1260 nm (min), 1310 nm (typ), 1360 nm (max)
Optical Power: -5 dBm (min), 2 dBm (max)
Extinction Ratio: 3.4 dB (min) |
| Cable Equalization |
(Belden 1694A coax)
12 Gbps, 65m
6 Gbps, 125m
3 Gbps, 190m
1.5 Gbps, 200m
270 Mbps, 405m |
| Video Path Delay |
Video Out is a delayed, reclocked version of Video In, at same frame rate, etc. Video Out is undefined when no input.
Video Latency, time measured between video input and video output connector:
12G = 3.2 µsec
6G = 3.2 µsec
3G level A = 3.2 µsec
3G level B-DL = 6.3 µsec
HD (1.5 Gb) = 6.3 µsec
SD (270 Mb) = 17.2 µsec |
| Audio Inputs and Outputs |
AES PCM audio, 1x 25 pin D female connector on converter, 8-channels in, 8-channels out, selectable in pairs
Breakout cable provided with 1x 25 pin D male connector:
4x XLR female input breakout connectors (AES3 110 ohm)
4x XLR male output breakout connectors (AES3 110 ohm) |
| Audio Data Formats |
AES3-2003 |
| Embedded Audio |
SMPTE 272M (SD): 20-bit, 48 kHz synchronous
SMPTE 299M (3G/HD): 24-bit, 48 kHz synchronous
Incoming embedded audio can be passed, removed, or overridden
Up to 16-channels supported
Note: 2048x1080p/PsF 29.97 and 30 formats support a maximum of 8-channels embedded audio. |
| Embed Path Audio Latency |
(Time measured between audio input and video output connector):
1500 µsec (SRC ON)
400 µsec (SRC OFF) |
| Disembed Path Audio Latency |
(Time measured between video input and audio output connector):
210 µsec |
| User Interface |
External DIP switch
USB port used with Mini-Config software application to configure the device via PC/Mac |
| Size (w x d x h) |
5.8" x 3.1" x 1.0" (147.32 x 78.74 x 25.4 mm) |
| Weight |
0.6 lb (0.3 kg) |
| Power |
+5-16VDC, 10 watts, power supply required, included with purchase |
| Environment |
Safe Operating Temperature: 0 to 40 C (32 to 104 F)
Safe Storage Temperature (Power OFF): -40 to 60 C (-40 to 140 F)
Operating Relative Humidity: 10-90% noncondensing
Operating Altitude: <3,000 meters (<10,000 feet) |
