NovaStar MCTRL660 PRO: Independent controller
­

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

NovaStar MCTRL660 PRO Independent Controller

(No reviews yet) Write a Review
  • NovaStar MCTRL660 PRO Independent Controller
  • NovaStar MCTRL660 PRO Independent Controller
  • NovaStar MCTRL660 PRO Independent Controller
  • NovaStar MCTRL660 PRO Independent Controller
SKU:
NVS-MCTRL660PRO-90
Manufacturer Part:
MCTRL660 PRO
Condition:
New
Weight:
10.00 LBS
Shipping:
Calculated at Checkout
Product Highlights:
  • Supports individual Gamma adjustment for RGB when the color depth of input source is 10-bit or 12-bit, which effectively controls image non-uniformity under low grayscale and white balance offset to improve image quality.
  • Low latency: Less than 1 ms (when the start position of image is 0.)
  • Dual working modes: working as sending card and fiber converter.
  • One-click backup and recovery, quickly recovering previous screen configurations to deal with sudden on-site failure.
  • Image mirroring, allowing for more cool and dazzling stage effects.
Novastar 4 outputs Synchronous LED Sender Box
$1,249.00
Payments as low as $28.71*
Quantity: 

Description

Novastar MCTRL660 PRO 4 outputs Synchronous LED Sender Box

The MCTRL660 PRO is a professional controller developed by NovaStar. A single MCTRL660 PRO has a loading capacity of up to 1920×1200@60Hz.

It supports custom resolutions with the width up to 3840 pixels and height up to 2560 pixels, which meets configuration requirement of ultra-large screens.

    The MCTRL660 PRO has a variety of video connectors:
  • Input connectors: 1 × 3G-SDI, 1 × HDMI 1.4a, 1 × single-link DVI.
  • Output connectors: 6 × Gigabit Ethernet port, 2 × 10G optical port.
  • Loop output connectors: 1 × 3G-SDI LOOP, 1 × HDMI 1.4a LOOP, 1 × DVI LOOP.
Novastar 4 outputs Synchronous LED Sender Box
Novastar 4 outputs Synchronous LED Sender Box
View AllClose

Technical Specs

NOVASTAR MCTRL660 PRO SPECS
Input Connectors
Features
Input Connector Color Depth Sampling Format Maximum Input Resolution
HDMI 1.4a 8-bit RGB 4:4:4
YCbCr 4:4:4
YCbCr 4:2:2
YCbCr 4:2:0
1920×1200@60Hz 
10-bit / 12-bit   1920×1200@60Hz
Single-link DVI 8-bit 1920×1200@60Hz 
10-bit / 12-bit  1920×1200@60Hz 
3G-SDI Maximum supported input resolution: 1920×1080@60Hz.

Note:
  • 3G-SDI input sources do not support input resolution and color depth settings.
  • The Gamma value can be adjusted for 8-bit input sources and cannot be adjusted for 10-bit or 12-bit input sources.
Input
DVI IN
  • Single-link DVI connector
  • Custom resolutions supported:
    • Maximum width: 3840 pixels
    • Maximum height: 2560 pixels
  • Supported standard resolutions:
    • 1024×768@(24/30/48/50/60/72/75/85/100/120)Hz
    • 1280×1024@(24/30/48/50/60/72/75/85)Hz
    • 1366×768@(24/30/48/50/60/72/75/85/100)Hz
    • 1440×900@(24/30/48/50/60/72/75/85)Hz
    • 1600×1200@(24/30/48/50/60)Hz
    • 1920×1080@(24/30/48/50/60)Hz
    • 1920×1200@(24/30/48/50/60)Hz
    • 2560×960@(24/30/48/50)Hz
    • 2560×1600@(24/30)Hz
HDMI IN
  • HDMI 1.4a compliant
  • HDCP 1.4 compliant
  • Custom resolutions supported:
    • Maximum width: 3840 pixels
    • Maximum height: 2560 pixels
  • Supported standard resolutions:
    • 1024×768@(24/30/48/50/60/72/75/85/100/120)Hz
    • 1280×1024@(24/30/48/50/60/72/75/85)Hz
    • 1366×768@(24/30/48/50/60/72/75/85/100)Hz
    • 1440×900@(24/30/48/50/60/72/75/85)Hz
    • 1600×1200@(24/30/48/50/60)Hz
    • 1920×1080@(24/30/48/50/60)Hz
    • 1920×1200@(24/30/48/50/60)Hz
    • 2560×960@(24/30/48/50)Hz
    • 2560×1600@(24/30)Hz
3G-SDI IN
  • SMPTE ST 425-1 Level A & B, SMPTE ST 274, ST 296, ST 295 compliant
  • Maximum supported input resolution: 1920×1080@60Hz

Note: 3G-SDI input sources do not support input resolution and color depth settings.
Output
RJ45 × 6
  • 6 Gigabit Ethernet ports
  • Maximum loading capacity of a single Ethernet port:
    • For 8-bit input sources: 650,000 pixels
    • For 10-bit/12-bit input sources: 320,000 pixels
  • Support redundancy between Ethernet ports.
OPT1
OPT2
  • 10G optical ports
    • Single-mode twin-core fiber: Support LC optical connectors; wavelength: 1310 nm; transmission distance: 10 km; OS1/OS2 recommended.
    • Dual-mode twin-core fiber: Support LC optical connectors; wavelength: 850 nm; transmission distance: 300 m; OM3/OM4 recommended.
  • The maximum loading capacity of a single optical port equals to that of all the 6 Ethernet ports.
  • 2 OPT inputs/outputs
    • The OPT1 works as the primary input or output port, and the 6 Gigabit Ethernet ports work as the corresponding output or input ports.
    • The OPT2 works as the backup input or output port of OPT1.
  • In the sending card mode, both OPT ports and 6 Gigabit Ethernet ports can work as output ports to output the same image.
  • In the fiber converter mode, when the OPT ports work as the input ports, the 6 Gigabit Ethernet ports work as output ports. When the 6 Gigabit Ethernet ports work as input ports, the OPT ports work as output ports
DVI LOOP DVI loop output
HDMI LOOP HDMI loop output
Support HDCP 1.3 loop output encryption.
3G-SDI LOOP SDI loop output
Monitor
HDMI Connect to a monitor to monitor the inputs. The output resolution of this connector is 1920×1080@60Hz (fixed output with a width of 1920 pixels and height of 1080 pixels).

If the input resolution exceeds the monitor resolution, the input will be automatically scaled in proportion and then displayed on the monitor starting from its top left.
Control
GENLOCK IN GENLOCK input connector:
  • Genlock type: Blackburst
  • Input Genlock sync signal to ensure synchronization and same refresh rate between the output signals of cascaded MCTRL660 PRO units and the external Genlock input signal.
GENLOCK LOOP Genlock loop output connector. Up to 8 MCTRL660 PRO units can be cascaded.
ETHERNET Fast Ethernet port, which connects to PC and supports TCP/IP
USB IN Input port for cascading devices, or connecting to PC
USB OUT Output port for cascading devices. Up to 8 MCTRL660 PRO units can be cascaded.
General
Power supply 100 V–240 V AC
Power switch ON/OFF
Input voltage 100 V–240 V AC
Rated power consumption 20 W
Temperature -20°C–60°C
Humidity 10% RH–90% RH, non-condensing
Temperature -25°C–125°C
Carrying case 550 mm × 440 mm × 175 mm
White cardboard box
Packing box 530 mm × 140 mm × 410 mm
Craft paper box
Accessory box White cardboard box
Accessories
  • 1 × Ethernet cable
  • 1 × DVI cable
  • 1 × USB cable
  • 1 × HDMI cable
  • 1 × Power cord
Dimensions 482.6 mm × 356.0 mm × 50.1 mm
Space Requirement 1U
Net Weight 4.6 kg
Certifications RoHS, EMC, FCC, IC, LVD
View AllClose

What's Included

  • Novastar MCTRL660 PRO 4 outputs Synchronous LED Sender Box
View AllClose
Please wait...

Can not place the order

Order limit has been exceeded: