Panasonic AK-UCU700 Camera Control Unit with LEMO Connector

Panasonic AK-UCU700PSJ AK-UCU700 Camera Control Unit with LEMO Connector

The Panasonic AK-UCU700 Camera Control Unit supports the next-generation SMPTE ST 2110 IP transmission standard as well as JPEG XS to uncompress/compress 4K video by a factor of 10 without degrading quality. The CCU is designed to support the Dante network audio standard and NDI and SRT IP transmission standards. This version of the AK-UCU700 offers LEMO connectivity. When power is supplied from the CCU, the uncompressed optical transmission distance between the CCU and camera is up to 6500'.

Panasonic AK-UCU700 Camera Control Unit with LEMO Connector

Product Highlights:

• Supports Simultaneous 4K HDR and HD SDR
• 6500' Uncompressed Optical Transmission
• 3.5" Color LCD Touch Panel

• Panasonic AK-UCU700 Camera Control Unit with LEMO Connector

Panasonic AK-UCU700 Camera Control Unit with LEMO Connector

Panasonic AK-UCU700PSJ AK-UCU700 Camera Control Unit with LEMO Connector

The Panasonic AK-UCU700 Camera Control Unit supports the next-generation SMPTE ST 2110 IP transmission standard as well as JPEG XS to uncompress/compress 4K video by a factor of 10 without degrading quality. The CCU is designed to support the Dante network audio standard and NDI and SRT IP transmission standards. This version of the AK-UCU700 offers LEMO connectivity. When power is supplied from the CCU, the uncompressed optical transmission distance between the CCU and camera is up to 6500'.

 

Panasonic AK-UCU700 Specs
Power Supply	100 V - 240 V AC, 50 Hz/60 Hz
Capacity for Supplying Power to a Camera	AC 240 V (tolerance 5％), 1.46 A、50 Hz/60 Hz [Target]
Operating Temperature	0 °C to 40 °C (32 °F to 104 °F)
Humidity	10 % to 90 % (no condensation)
Storage Temperature	–20 °C to 60 °C (–4 °F to 140 °F)
Dimension (W x H x D)*1	424 mm x 88 mm x 401 mm (16-5/8 inches x 3-7/16 inches x 15-13/16 inches) (excluding protrusions)
Video Output	3G/HD-SDI: 5 lines 12G/6G/3G/HD-SDI: 2 lines HD-SDI: 1 line (shared with picture monitor output*1)
Return Input	3G/HD-SDI: 4 lines
Reference Input	BB (black burst) / tri-level*2: 1 line (automatic termination, connect to upper connector; BB signal and tri-level signal automatically recognized, with loop-through output)
Microphone Output	0 dBm/600 Ω, 2 lines (XLR, 3-pin, male)
Communication	Intercom input/output (ENG / PROD, 0 dBm, 600 Ω (4 W) / 1 V [p-p], 200 Ω (RTS), 4 W / RTS / CLRCOM) : 2 lines*1 PGM input (0 dBm/600 Ω) : 2 lines Tally input (red, green, yellow) : 1 input each
Tally Output	Tally output (red, green, yellow) : 1 output each
AUX output	Selective output from Return inputs.
REAR ROP	RS-422 1 line, 16 V DC output (only one of this and FRONT ROP can be selected at one time via the menu or the [ROP FRONT/REAR] selection switch on the front panel)
MSU	RS-422 1 line, GPI for control
LAN TRUNK	LAN connection with camera side via an optical cable 1 line, 100BASE-TX, 1000BASE-T
LAN	Personal computer connection for distribution via the Web 1 line, 10BASE-T, 100BASE-TX, 1000BASE-T (use a crossover cable when connecting directly with a personal computer)
SFP+	*AK-NP701G sold separately
Audio	* AK-NP702G sold separately
Streaming	* AK-NP703G sold separately