Vaxis Storm 1000S Wireless Kit - V-Mount
Product Highlights:
- Distance: 1500' /500 meters
- Support metadata, timecode, and start/stop flags
- Plug and Play
- Uncompressed 3G/HD/SD-SDI and HDMI,SDI loop out
- Recessed connector ports for durability
- Transmitter
- Receiver
- 2x D-Tap Power Cable
- Articulating Arm
- Vaxis 2 Year Limited Warranty
Vaxis Storm 1000S Wireless Kit - V-Mount
Vaxis VS19-1000-TR01 Storm 1000S Wireless Kit - V-Mount
STORM 1000S is a brand-new design that is best for higher end productions that need a mix of long range and sleek design. Since all STORM series models are compatible, it also serves perfectly as a shorter range and smaller receiver option when used in conjunction with the flagship STORM 3000.
Range/ Transmission
With cutting edge technology built-in antennas, true line-of-sight range is boosted and stablized up to 1000 feet and will pass through flags, timecode and metadata.
Durable Exterior
Design The STORM 1000 is a brand-new design. The recessed ports prevent the most common damage on sets, dropping. Buttons and I/O ports are on the same side making the unit more accessible and provides flexibility when rigging. On top all that, the mounting is made easy and elegant with the mounting bracket to make rig every low profile and streamlined for Gimbal, drone and Steadicam work. Without exterior antennas never worry about bending or breaking an antenna again.
OLED Info Readout
The bright OLED display gives users access to all crucial information to make the shoot possible. The display shows battery voltage, video formats, channel, fan speed and transmission strength.
| Vaxis STORM 1000S Specifications |
|---|
| Transmitter |
|---|
| Construction |
Milled Aluminum Chassis and Regulation-Compliant PCB |
| Video Inputs |
SDI: 1x BNC (75 Ohm), 3G/HD/SD
HDMI: 1x HDMI Type A Receptacle |
| Video Outputs SDI |
1x BNC (75 Ohm), 3G/HD/SD
1x Loop-Through |
| Color Sampling |
SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled) HDMI: RGB 4:4:4, 8-Bit |
| Latency |
Zero Delay ( < 0.001 Seconds TX to RX without Format Conversion) |
| Supported Resolutions |
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
480i: 59.94
576i: 50 |
| Audio Input |
Embedded |
| USB Interface Functionality |
Upgrade via Mini-USB |
| Wireless |
FCC Approved Frequencies (5190/ 5230/ 5790/ 5830) |
| RF Power |
17 dBm EIRP |
| Encryption |
AES-128 |
| Range |
Up to 1000' Line of Sight |
| Multicast |
Multicast Up to Unlimited Rx |
| Power Input |
2-Pin Connector 7 to 36 VDC |
| Power Consumption |
Nominal 6 W (Measured at 1080p60) |
| Operating Temperature |
32 to 122 Degree F (0 to 50 Degree C) |
| Mountable |
1x 1/4"-20 Threaded Mounting Hole |
| Receiver |
|---|
| Construction |
Milled aluminum Chassis and Regulation-Compliant PCB |
| Video Outputs |
SDI: 2x BNC (75 Ohm), 3G/HD/SD
HDMI: 1x HDMI Type A Receptacle |
| USB |
1x USB Type 3.0 Micro-B Receptacle |
| Color Sampling |
SDI: YCbCr 4:2:2, 10-bit (8-Bit when Format Conversion is Enabled) |
| HDMI |
RGB 4:4:4, 8-Bit |
| Latency |
Zero Delay ( < 0.001 Seconds TX to RX without Format Conversion) |
| Supported Resolutions |
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
480i: 59.94
576i: 50 |
| Audio Input |
Embedded |
| USB Interface Functionality |
Upgrade via Mini-USB |
| Wireless |
FCC Approved Frequencies (5190/ 5230/ 5790/ 5830) |
| RF Power |
17 dBm EIRP |
| Encryption |
AES-128 |
| Range |
Up to 1000' Line of Sight |
| Multicast |
Multicast Up to Unlimited Rx |
| Power Input |
2-Pin Connector 7 to 36 VDC |
| Power Consumption |
Nominal 8 W (Measured at 1080p60) |
| Operating Temperature |
32 to 122 Degree F (0 to 50 Degree C) |
| Mountable |
3x 1/4"-20 Threaded Mounting Hole |
