Libec Carbon Fiber Tripod System with NH10 Head, Ground Spreader & Carry Case
Product Highlights:
- NH10 Video Head with 8.8 lb Payload
- Carbon Fiber Tripod with Ground Spreader
- System Carry Case
- 75mm Half Ball/Flat Base Mount
- Continuous Counterbalance, Pan/Tilt Drag
- +90/-70° Tilt Angle
- Snap-On, Sliding Quick Release Plate
- LED-Illuminated Bubble Level
- Includes Pan Handle
- Libec NH10 75mm Ball/Flat Base Video Head with Pan Handle (8.8 lb Payload)
- Pan Handle
- Quick Release Plate
- 1/4"-20 Screw
- 3/8"-16 Screw
- Limited 3-Year Warranty
- Libec RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl
- Limited 3-Year Warranty
- Libec RC-20 Carrying Case for NX-100C & NX-300C Tripods
- Limited 3-Year Warranty
- Ground Spreader
Libec Carbon Fiber Tripod System with NH10 Head, Ground Spreader & Carry Case
Libec NX-100C Carbon Fiber Tripod System with NH10 Head, Ground Spreader & Carry Case
Support your small camera rig weighing up to 8.8 lb and create smooth pan and tilt movements with this Carbon Fiber Tripod System with NH10 Head, Ground Spreader & Carry Case from Libec. The system includes the NH10 dual 75mm bowl/flat base video head, the RT20C carbon fiber tripod, the SP-1B ground spreader, and an RC-20 carry case.
The base of the head fits the tripod's 75mm bowl, and it is also compatible with tripods with a flat mount. It features continuous pan/tilt drag and counterbalance, a snap-on/off quick release plate, an illuminated bubble level, and a pan bar. The two-stage lightweight carbon fiber tripod weighs only 3.5 lb and can extend to a height of 60.6". The ground spreader installs at the base of the tripod to add stability to the rig. The carry case stores and transports the entire system.
Libec NH10 75mm Ball/Flat Base Video Head with Pan Handle (8.8 lb Payload) Designed to support small camera rigs weighing up to 8.8 lb, the NH10 75mm Ball/Flat Base Video Head with Pan Handle from Libec features a unified ball/flat mount design. The base of the tripod can fit either in a standard 75mm bowl or on a flat mount with a 3/8"-16 screw. Having both options available means you can transfer the head from a tripod with a bowl mount to a flat mount slider.
To achieve proper balance, the NH10 head includes a snap-on/off camera plate that can slide up to 1.2" of fore/aft adjustment, and it features 1/4"-20 and 3/8"-16 camera mounting screw options. The screw and locating pin are moveable to orient the plate on the camera to achieve the best possible balance. Once the camera is balanced, the continuous counterbalance and pan/tilt drag controls provide smooth movement. On the side, there are 1/4"-20 and 3/8"-16 threads to mount a variety of accessories such as a light, monitor, or extension arm.
Included with the NH10 is a pan handle that can be placed on the right or left side of the head by screwing it onto one of the mounts. The LED-illuminated bubble level helps to level the camera on uneven surfaces, even in low light.
Libec RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl Add a durable, lightweight tripod to your camera rig with this RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl from Libec. The RT20C offers a 75mm bowl fitting for mounting a wide variety of fluid heads. Without the included feet and spreader, the lightweight carbon fiber legs weigh only 3.5 lb. Secured by twist levers, the 2-stage legs have a height range of 14.6 to 60.6".
Libec RC-20 Carrying Case for NX-100C & NX-300C Tripods The Libec RC-20 Carrying Case is designed to carry Libec NX-100C and NX-300C tripods systems. Made from a combination of materials that are resistant to water, wear, and tearing, the case has a soft non-padded lining that makes it easy to insert and remove your tripod without scratching its finish.
| Libec NH10 75mm Ball/Flat Base Video Head With Pan Handle (8.8 Lb Payload) Specs |
|---|
| Camera Plate |
|---|
| Camera Plate Features |
Sideload, Sliding Balance Plate |
| Camera Mounting Screw |
1 x 1/4"-20 Male with Locating Pin
1 x 3/8"-16 Male with Locating Pin |
| Balance Plate Sliding Range |
1.2" / 30.5 mm |
| Safety Lock |
Yes |
| Tripod Platform |
|---|
| Base Mount |
3/8"-16 Female
75 mm Half Ball
Flat Base |
| Pan & Tilt |
|---|
| Drag Control |
Tilt: Continuous 3-Step
Pan: Continuous 3-Step |
| Drag Type |
Friction |
| Vertical Tilt |
+90° to -70° |
| Independent Pan Lock |
Yes |
| Independent Tilt Lock |
Yes |
| Physical |
|---|
| Load Capacity |
8.8 lb / 4 kg |
| Counter Balance |
Continuous 5-Step (0 to 5.5 lb / 0 to 2.5 kg) |
| Pan Handle Fittings |
2 |
| Bubble Level |
1 x Illuminated |
| Accessory Mounting |
1 x 1/4"-20 Female Thread
1 x 3/8"-16 Female Thread |
| Base Diameter |
2.95" / 75 mm |
| Operating Temperature |
-40 to 140°F / -40 to 60°C |
| Weight |
4 lb / 1.8 kg |
| Libec RT20C 2-Stage Lightweight Carbon Fiber Tripod With 75mm Bowl Specs |
|---|
| Legs |
|---|
| Leg Lock Type |
Rotating Locking Lever |
| Leg Sections |
3 |
| Spreader |
Mid-Level (Included) |
| General |
|---|
| Maximum Working Height |
60.6" / 154 cm |
| Minimum Working Height |
14.6" / 37 cm |
| Materials |
Aluminum |
| Weight |
3.5 lb / 1.6 kg |
| Libec RC-20 Carrying Case For NX-100C & NX-300C Tripods Specs |
|---|
| Physical |
|---|
| Carrying/Transport Options |
Connecting Handles, Shoulder Strap |
| Type of Closure |
Zipper |
| Exterior Material |
Nylon, Plastic, Polyester, Polyethylene, Polypropylene, TPE |
| Padded |
No |
| Interior Dimensions |
H: 33.5 x W: 7.9 x L: 6.3" / H: 85.0 x W: 20.0 x L: 16.0 cm |
| Weight |
17.6 oz / 500 g |
