Description
Libec DL-3 Tripod Dolly Overview
Support your small camera rig weighing up to 8.8 lb and create smooth pan and tilt movements with this NX-100MC Carbon Fiber Tripod System with NH10 Head, Mid-Spreader, Feet & Carry Case from Libec. The NX-100MC system includes the NH10 dual 75mm bowl/flat base video head, the RT20C carbon fiber tripod, the BR-2B mid-level spreader, a large rubber foot set, and an RC-20 carry case.
The base of the head fits the tripod's 75mm bowl, and it is also compatible with tripods with a flat mount. It features continuous pan/tilt drag and counterbalance, a snap-on/off quick release plate, an illuminated bubble level, and a pan bar. The two-stage lightweight carbon fiber tripod weighs only 3.5 lb and can extend to a height of 60.6". The mid-level spreader installs at the midpoint of the tripod to add stability to the rig, and a rubber foot set is included to keep the legs stable on flat or uneven surfaces. The carry case stores and transports the entire system.
Libec NH10 75mm Ball/Flat Base Video Head with Pan Handle (8.8 lb Payload)
Designed to support small camera rigs weighing up to 8.8 lb, the NH10 75mm Ball/Flat Base Video Head with Pan Handle from Libec features a unified ball/flat mount design. The base of the tripod can fit either in a standard 75mm bowl or on a flat mount with a 3/8"-16 screw. Having both options available means you can transfer the head from a tripod with a bowl mount to a flat mount slider.
To achieve proper balance, the NH10 head includes a snap-on/off camera plate that can slide up to 1.2" of fore/aft adjustment, and it features 1/4"-20 and 3/8"-16 camera mounting screw options. The screw and locating pin are moveable to orient the plate on the camera to achieve the best possible balance. Once the camera is balanced, the continuous counterbalance and pan/tilt drag controls provide smooth movement. On the side, there are 1/4"-20 and 3/8"-16 threads to mount a variety of accessories such as a light, monitor, or extension arm.
Included with the NH10 is a pan handle that can be placed on the right or left side of the head by screwing it onto one of the mounts. The LED-illuminated bubble level helps to level the camera on uneven surfaces, even in low light.
Libec RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl
Add a durable, lightweight tripod to your camera rig with this RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl from Libec. The RT20C offers a 75mm bowl fitting for mounting a wide variety of fluid heads. Without the included feet and spreader, the lightweight carbon fiber legs weigh only 3.5 lb. Secured by twist levers, the 2-stage legs have a height range of 14.6 to 60.6".
Libec RC-20 Carrying Case for NX-100C & NX-300C Tripods
The Libec RC-20 Carrying Case is designed to carry Libec NX-100C and NX-300C tripods systems. Made from a combination of materials that are resistant to water, wear, and tearing, the case has a soft non-padded lining that makes it easy to insert and remove your tripod without scratching its finish.
Construction
- Made of nylon, polyester, polypropene, polyethylene, acetal plastic & thermoplastic elastomer
- Combining multiple materials adds wear, water, and rip resistance
- Soft unpadded interior makes it easy to insert and remove tripod without marking or marring its finish
- Zipper closure
Pockets
- Large main compartment holds a NX-100C or NX-300C tripod system
- Zippered exterior slip pocket
- Open exterior slip pocket
Carrying options
- Soft connecting carry handles
- Carry handles are located off-center for proper load balance with the tripod system inside
- Attached, adjustable shoulder strap
- Weighs just over a pound empty
Libec Lightweight Rubber Foot for RT20C Tripod (Set of 3)
These Lightweight Rubber Feet for RT20C Tripod from Libec provide improved traction on polished floors and other slick surfaces when using the RT20C carbon fiber tripod. They attach and remove quickly and prevent marring surfaces.
Libec BR-2B Mid-Level Spreader for RT20C and RT30B Tripods
The BR-2B Mid-Level Spreader from Libec is designed to offer added stability to RT20C and RT30B tripods. It installs onto the mid-level leg stage and can adjust the length of each arm by sliding them out and tightening them with locking knobs. Best used on uneven surfaces where ground spreaders won't lie flat, the BR-2B also keeps the tripod's legs from twisting.
Compatibility
Libec NX-100MC Carbon Fiber Tripod System with NH10 Head, Mid-Spreader, Feet & Carry Case
Technical Specs
Camera Plate Features | Sideload, Sliding Balance Plate |
Camera Mounting Screw | 1 x 1/4"-20 Male with Locating Pin 1 x 3/8"-16 Male with Locating Pin |
Balance Plate Sliding Range | 1.2" / 30.5 mm |
Safety Lock | Yes |
Base Mount | 3/8"-16 Female 75 mm Half Ball Flat Base |
Drag Control | Tilt: Continuous 3-Step Pan: Continuous 3-Step |
Drag Type | Friction |
Vertical Tilt | +90° to -70° |
Independent Pan Lock | Yes |
Independent Tilt Lock | Yes |
Load Capacity | 8.8 lb / 4 kg |
Counter Balance | Continuous 5-Step (0 to 5.5 lb / 0 to 2.5 kg) |
Pan Handle Fittings | 2 |
Bubble Level | 1 x Illuminated |
Accessory Mounting | 1 x 1/4"-20 Female Thread 1 x 3/8"-16 Female Thread |
Base Diameter | 2.95" / 75 mm |
Operating Temperature | -40 to 140°F / -40 to 60°C |
Weight | 4 lb / 1.8 kg |
Package Weight | 5.295 lb |
Box Dimensions (LxWxH) | 15.8 x 8.4 x 6" |
Leg Lock Type | Rotating Locking Lever |
Leg Sections | 3 |
Spreader | Mid-Level (Included) |
Maximum Working Height | 60.6" / 154 cm |
Minimum Working Height | 14.6" / 37 cm |
Materials | Aluminum |
Weight | 3.5 lb / 1.6 kg |
Package Weight | 5.43 lb |
Box Dimensions (LxWxH) | 31.9 x 8.4 x 7.4" |
Carrying/Transport Options | Connecting Handles, Shoulder Strap |
Type of Closure | Zipper |
Exterior Material | Nylon, Plastic, Polyester, Polyethylene, Polypropylene, TPE |
Padded | No |
Interior Dimensions | H: 33.5 x W: 7.9 x L: 6.3" / H: 85.0 x W: 20.0 x L: 16.0 cm |
Weight | 17.6 oz / 500 g |
Package Weight | 2.08 lb |
Box Dimensions (LxWxH) | 14.6 x 9.6 x 5.8" |
Material | Rubber |
Dimensions | ø: 2.7 x L: 3.5" / ø: 68 x L: 88 mm |
Type | Mid-Level |
Adjustable | Yes |
Weight | 7.1 oz / 200 g |
Package Weight | 0.85 lb |
Box Dimensions (LxWxH) | 13.35 x 5.3 x 4.9" |
What's Included
- Libec NH10 75mm Ball/Flat Base Video Head with Pan Handle (8.8 lb Payload)
- Pan Handle
- Quick Release Plate
- 1/4"-20 Screw
- 3/8"-16 Screw
- Limited 3-Year Warranty
- Libec RT20C 2-Stage Lightweight Carbon Fiber Tripod with 75mm Bowl
- Limited 3-Year Warranty
- Libec RC-20 Carrying Case for NX-100C & NX-300C Tripods
- Limited 3-Year Warranty
- Libec Lightweight Rubber Foot for RT20C Tripod (Set of 3)
- Limited 3-Year Warranty
- Libec BR-2B Mid-Level Spreader for RT20C and RT30B Tripods
- Limited 3-Year Warranty